ED30 rear valance

[rf860]

I'm wanting to vinyl wrap the diffuser part on my rear bumper. Does this part come off the bumper and if so, how?

cheers.

[Top Cat]

It is all one piece i believe. 

[keano]

Me too. And no it doesn't.  

[rf860]

Shame that. Would have made wrapping a lot easier.

[keano]

Shame that. Would have made wrapping a lot easier.

You can't beat a good challenge mate

[rf860]

Shame that. Would have made wrapping a lot easier.

You can't beat a good challenge mate

I'm challenged enough with my dissertation lol!

Seriously tho, I like things to be perfect so it will take me ages and I'll have to roll all over the ground to get it right lol.

Job for next weekend I think.

[chowgar]

one section but has a decent recess so shouldnt be too hard... mines getting sprayed at the mo and a bit of  :happy2:masking off is all thats needed...

[monte]

Ive got one thats already wrapped in 3M-Carbon. You can have it for £50 


In some sunlight you may be able to see a slight mark near the N/S wheel. This might polish out but I cant guarantee it 

[MC71]

^^^^ Ouch!!

Vinyl wrapped mine. Not easy but definitely a DIY job as long as you take your time. Make sure its a dry day as you'll spend a lot of time laying on the ground....

[sarobertson1]

I plan on doing the same to mine...rolling about on the ground in this weather is never an encouraging thought!

[rf860]

^^^^ Ouch!!

Vinyl wrapped mine. Not easy but definitely a DIY job as long as you take your time. Make sure its a dry day as you'll spend a lot of time laying on the ground....

That car is lovely!! Exactly how i want mine to look :D

[chigmuss]

Been looking at this myself, does the exhaust 'trim' piece detach and get wrapped separately?

[MC71]

^^^^ No. It's all one big piece. Due to the intricate nature of that particular part and all the curves involved its easier to wrap that separately. Mine has been on a year and is still the same as the day it was done. The heat from the exhaust on the vinyl is not an issue either, I have mine wrapped all the way under the valance as far as it would go.

[rf860]

^^^^ No. It's all one big piece. Due to the intricate nature of that particular part and all the curves involved its easier to wrap that separately. Mine has been on a year and is still the same as the day it was done. The heat from the exhaust on the vinyl is not an issue either, I have mine wrapped all the way under the valance as far as it would go.

I think he means the tiny rim of plastic that goes round the edge of the exhaust cut out ?

[MC71]

^^^^ yes.

That is also part of the lower bumper/valance and yes the whole thing is from one giant mould. Nothing (apart from the tow eye cover) is a separate piece.