Author Topic: RNS 510 Button illumination has stopped working. (Read 2933 times)

ell.s · « **on:** February 15, 2013, 12:28:51 am »

Got in my car tonight and noticed the RNS 510s buttons weren't illuminated so I tried turning the lights back off and on keys in and our and it got me nowhere is thus a common fault with an easy fix or us my unit buggered?

Eddie-NL · « **Reply #1 on:** February 15, 2013, 01:10:58 am »

do the buttons work?
have you recently updated the firmware?

ell.s · « **Reply #2 on:** February 15, 2013, 05:36:21 am »

Yes everything seems to work, no not recently probably about 3 months ago but all has been fine till now.

Eddie-NL · « **Reply #3 on:** February 15, 2013, 05:32:06 pm »

the car sends a signal to switch the illumination Terninal 58D

Does your RNS have Test / Development mode (press and hold SETUP for about 30 seconds)
I think if you go into there and select CAN it should show you if the RNS is receiving the signal

V6nutter · « **Reply #4 on:** November 27, 2016, 08:48:57 am »

Hi - did you get this issue resolved? Im having the same problem.

V6nutter · « **Reply #5 on:** November 27, 2016, 09:39:05 am »

Results from CAN menu

Speed Signal 0km/h
CAN Reversing off
KL15 on
KL58 d 94%
S-Kontact on
Mute bit off
Analog mute off
Mute Value 0

Do these look ok?

Author Topic: RNS 510 Button illumination has stopped working. (Read 2933 times)

ell.s

RNS 510 Button illumination has stopped working.

Eddie-NL

Re: RNS 510 Burton illumination has stopped working.

ell.s

Re: RNS 510 Burton illumination has stopped working.

Eddie-NL

Re: RNS 510 Burton illumination has stopped working.

V6nutter

Re: RNS 510 Button illumination has stopped working.

V6nutter

Re: RNS 510 Button illumination has stopped working.