"GOLFZILLA" .... 600+BHP Project... TSR Performance ....

[Hurdy]

Sounds mad that does!

Now stick to going L04XX or man up to a GTX30?

the tsr gtx kit manifold etc was designed on the boss's golf R 

Every day I get drawn closer to the GTX30. Is there much spool difference between the GTX3071R and the GTX3076R?

[rich83]

Do it hurdy. "Man" turbos!!!!!! 

[Pikey Motorsports]

about 500rpm further up mate.. these turbos got plenty of power still low down though.. and more then makes up for it if you have the head done and have it rev out close to 8k

[Hurdy]

about 500rpm further up mate.. these turbos got plenty of power still low down though.. and more then makes up for it if you have the head done and have it rev out close to 8k

Cheers.

Already ordered a few bits in that area! and already have a 7500rpm limiter.

Yours needs to get on the dyno. It would be great to see what it does.

[GrayMK5GTI]

about 500rpm further up mate.. these turbos got plenty of power still low down though.. and more then makes up for it if you have the head done and have it rev out close to 8k

Cheers.

Already ordered a few bits in that area! and already have a 7500rpm limiter.

Yours needs to get on the dyno. It would be great to see what it does.

JKM Dyno. . . 

[Pikey Motorsports]

i tend not to get to uptight with dyno number yes its nice to have a good result on paper and im pritty sure it will do 500hp-520hp with a boost controller and without meth aslong as it can put it down on the dyno.. i will put it back on though when it has its final setup

all i know is its alot faster than an m6 and c63 with performance package at 1.5bar so its doing something right lol  

[Pikey Motorsports]

about 500rpm further up mate.. these turbos got plenty of power still low down though.. and more then makes up for it if you have the head done and have it rev out close to 8k

Cheers.

Already ordered a few bits in that area! and already have a 7500rpm limiter.

Yours needs to get on the dyno. It would be great to see what it does.

JKM Dyno. . . 

why jkm's dyno?

[Hurdy]

about 500rpm further up mate.. these turbos got plenty of power still low down though.. and more then makes up for it if you have the head done and have it rev out close to 8k

Cheers.

Already ordered a few bits in that area! and already have a 7500rpm limiter.

Yours needs to get on the dyno. It would be great to see what it does.

JKM Dyno. . . 

why jkm's dyno?

Heartbreaker low reading dyno!

[GrayMK5GTI]

about 500rpm further up mate.. these turbos got plenty of power still low down though.. and more then makes up for it if you have the head done and have it rev out close to 8k

Cheers.

Already ordered a few bits in that area! and already have a 7500rpm limiter.

Yours needs to get on the dyno. It would be great to see what it does.

JKM Dyno. . . 

why jkm's dyno?

Heartbreaker low reading dyno!

Although every standard car reads about right (I'm not going to start the Dyno accuracy debate here  )

Would be good to see a comparison from your local trusted dyno and JKM's though Pikey 

[Pikey Motorsports]

ahh i thought they read abit low but doesnt necessarly mean there more accurate does it lol?

and yes it would be nice to compare and would make you feel more confident with the numbers if there even on different sets of rollers, but again if your happy with it on the road   watever the car made on a different set i dont think i would be to bothered to be honest, on the road its an animal and im 100% happy i done it.. i just cant wait to start on some chassis work and for the show season/summer

[TommyR]

Just watched the Christmas fun videos, that noise is spectacular

[Pikey Motorsports]

Just watched the Christmas fun videos, that noise is spectacular

 

[mk_boy85]

I'm extremely impressed with this.


Sent from my iPhone using Tapatalk

[Pikey Motorsports]

cheers mate

[Pikey Motorsports]

time to start the interior!