Literally a very easy job. Slightly hardened on a lowered car. But still an easy task. Im assuming its a gti, but makes no difference really.
I would start under the car by removing the torx screws along the front where the splitter joins the car. I count around 8-10. Then remove the centre grill. This should be fairly self explanitory. There are 2 screws at the top & two under the plate surround at either side. This should then foward and off.
The next part is to tackle the torx in the wheel arches. There are 4/5 either side. 3/4 holding the arch liner to the bumper & 1 that is virtical. Then repeat the other side.
Then you should be able to pull from the wheel arch and it will pop off