Picked up some tinted InPro dark indicator lenses from Andy (berg) off here this week.
Fitted them last night, about hour and a bit for both sides. Bit fiddly but just took my time and made sure not to break any clips.
Gently prise off mirror lens, carefull not to break. Just adjust down to lowest setting then get your fingers behind it and pop it off. Un connect the heater elements.
Will then see the motor, 3 10torqs screws and this comes off. Then the fun part, gently prise the mirror caps off. I found wrapping a flat blade screw driver in cloth and leavering it off from the front helped. At the same time trying to release the tabs on top of the indicator lenses. Just takes some time but once tabs released the cover pulls straight up.
Then two 10torqs screws hold the black base on and the black mirror surround pulls off at same time, unconnect the indicator wire and all off:
Can then undo the final two 10torq screws that hold the indicator lens to the base.
Reffiting then reverse order:
Gave it all a clean inside whilst off:
Both back up and fitted:
Very pleased with the darker look on the red paint