All Things Mk5 > How to Guides / Troubleshooting
How To: Mk5 Heated Seats Retrofit
Gmac:
I'll take so pics.. :happy2:
In the mean time... Without looking at the car (not able to atm), both seats have the large black plug, male, on them, and the only button on both seats are the circle with the four indents. They are manual for back and forward and tilt. But I believe they do have the electric lumbar.
The loom itself seems to be rhd as the female black plugs to go to under the seats work out for length, ie the shorter one on rhs has the resulting earth wires and cecm, at the correct length to go to the earthing point just down from the bonnet release handle and cecm respectively.
Once I get a chance I'll untrim the car again and take a pic of the loom and also have a look at the seats...
Cheers for the help so far lads! It's not too cold yet so my rear is still toasty! :happy2:
And I reckon it's a case of having extra un-needed wires like you say Jason
Gmac:
Here's the pics of the seats, still havnet had a chance to get the trim off the get pics of the loom, but the bag the loom came in had 34048-2 on it.
1. Both seats have the four button
2. Drivers seat underneath
3. Drivers black male connection
4. Passenger's under seat
5. Passenger's black male connection
jason_rmh:
The button on each seat is the lumbar adjustment.
Looks like you have a module under each seat and the loom part number looks correct.
So, using the table from the guide, together with the kufatec instructions, and the notes in my previous comment, you should be able to label each wire and see what you're left with?
If there is anything left over, it may be for seat memory which probably won't be on your seats anyway.
Jas
Gmac:
--- Quote from: jason_rmh on October 19, 2017, 03:21:19 pm ---The button on each seat is the lumbar adjustment.
Looks like you have a module under each seat and the loom part number looks correct.
So, using the table from the guide, together with the kufatec instructions, and the notes in my previous comment, you should be able to label each wire and see what you're left with?
If there is anything left over, it may be for seat memory which probably won't be on your seats anyway.
Jas
--- End quote ---
Yeh, sounds like a plan! Label it up and give it a go. Cheers for your help lads. Got to love all grey wires and extra wires! Haha.
Gmac:
So, having another go at this now...
The wires are labelled as per the kufatec table/pic on page 4 of this guide. My question now is do I need all four 'fuse' wires? Two 30amp (sitxverstell/seat adjustment) and two 20amp (the Dauerplus)? ACTAULLY JUST NOTICED - on page 1 of here you mention the lumber being 20amp and live being 30amp, but the kufatec guide has this the other way around!??????????
Also have the 3 15 amp wires for the fuse box! Where should I put them?
So basically I've got 7 wires to find a home in the fuse box it seems?
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version