All Things Mk5 > How to Guides / Troubleshooting
How To: Mk5 Heated Seats Retrofit
jason_rmh:
--- Quote from: Gmac on October 25, 2017, 10:00:16 pm ---So to recap, I need to find 4 constant lives, for the 4 thick wires, and 1 ignition live.
I'll go and take a look on ebay at the piggyback fuses.. cheers fellas! :happy2:
--- End quote ---
Going off the kufatec instructions you need:
2 x KL30 for 20A constant live
3 x KL15 for 15A ignition live
The other 2 x KL30 for seat adjustment, just tape up out the way.
Gmac:
--- Quote from: jason_rmh on October 25, 2017, 10:17:53 pm ---
--- Quote from: Gmac on October 25, 2017, 10:00:16 pm ---So to recap, I need to find 4 constant lives, for the 4 thick wires, and 1 ignition live.
I'll go and take a look on ebay at the piggyback fuses.. cheers fellas! :happy2:
--- End quote ---
Going off the kufatec instructions you need:
2 x KL30 for 20A constant live
3 x KL15 for 15A ignition live
The other 2 x KL30 for seat adjustment, just tape up out the way.
--- End quote ---
Now i'm confused! :laugh:
Gmac:
S the 2 x kl-30, 30A Seat adjustment isn't anything to do with lumber adjustment?
Gmac:
--- Quote from: jason_rmh on October 24, 2017, 07:07:36 pm ---So you should have:
Thick wire, 30A for heated seats x 2?
Thick wire 20A for lumbar adjustment x 2?
Thin wire 5A for ignition live for heated seats.
That's 5, which leaves 2 not required for seat memory?
--- End quote ---
So not this then?
Gmac:
--- Quote from: Gmac on October 17, 2017, 02:48:24 pm ---
I have the loom ending '2'
SOive got four cables that need to go to the fuse box...hmm..
--- End quote ---
So that this is on the current page.. :happy2:
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version