All Things Mk5 > How to Guides / Troubleshooting
How To: Mk5 Heated Seats Retrofit
Gmac:
Thoughts on the above few posts Jason?
doylebros:
To allow you to make progress and confirm your thoughts and work done, why not take a temporary fused feed from the battery and prove you've got everything else correct.
Gmac:
--- Quote from: doylebros on October 26, 2017, 07:27:27 pm ---To allow you to make progress and confirm your thoughts and work done, why not take a temporary fused feed from the battery and prove you've got everything else correct.
--- End quote ---
I'm not sure I follow you? I've got the 7 wires left, and just need the sort out which of the 7 wires left I need. And how to go about buying a piggyback fuse with the matching fixings to the current wires..
The kufatec instructions seem to suggest that I need to plug all 7 in! (sh*t instructions, if this isn't the case!)
doylebros:
I assume your only interested in the heated seats working and not the lumber or memory seat.
So with that in mind if you connect the two heaviest connector to a temporary fused supply you'll be able to check if there's a feed to the under seat modules, that would be my starting point.
jason_rmh:
I have gone back and checked my installation, I only had 3 wires at the fuse box.
Unless some of these wires make a 'pair' for a fuse Connection?
I would call richter sport to see if they can help shed some light on why the loom has changed?
Richer Sport are the UK contact for kufatec.
I'll look at some wiring diagrams tomorrow to try work it out.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version