How to remove oil filler neck?

[craig_t]

As in title, can anyone tell me how to remove this.

[MC71]

Here you go.  

~~ Clicky here ~~

EDIT: do it when the engine is warm, will help.

[craig_t]

Here you go. 

~~ Clicky here ~~

Cheers

Have you done this urself?

[MC71]

^^^^ no matey i haven't as I always use an engine cover, whether with or without a CAI i place and with the engine cover on it would be a pain to get at. A fair few peeps have though.

 

[stealthwolf]

Be aware that once you take it off, you can't put it back on again. You have to buy and fit the whole assembly.

[camfollower]

Be aware that once you take it off, you can't put it back on again. You have to buy and fit the whole assembly.

I know it's a bit nasty... but couldn't you stick it back on with some high temp adhesive?

[craig_t]

I'm pretty sure you could stick it back on as its only stuck on from the factory.

[chudds]

so after removing the filler neck it just has the standard bayonet fitting so you can still use the same cap? if i were to make a liner with a threaded cap id just need to use high temp adhesive to make sure it says in place?