Nightmare on F/W updating - HELP Required

[Kiwi]

So I have the following

RNS 510 C - currently running 2760 F/W and Maps Version 7551

I have downloaded the firmware files from RNSfirmware.com  and from the my-GTI, I have versions 3810a and have Euro 4120 firmware.

I have bought Verbatim Discs DVD-R, TDK CDRw and Traxdata CD-R, but none of then get pass the full install stage, the RNS510 see's the image, see pictures below.







So apart from hanging myself, or driving the car into a brick wall, what on earth can I do...................

Someone help me out........... Does anyone have a disc that they know will 100% work??

Looking forward to your help

[skard]

Did you burn at a low speed?

[Kiwi]

Yes mate, lowest it would go was x4 speed

[skard]

There was no 1x or 2x option?

I'll report back later what brand I used, I had one failed attempt but then worked fine next attempt

[JoeDarKa]

Can firmware discs be used more than once?

[skard]

Yep unless they get scratched/damaged

[Kiwi]

There was no 1x or 2x option?

I'll report back later what brand I used, I had one failed attempt but then worked fine next attempt

I requested x1 speed, but reading the info as displayed it was writing at x4 speed

[bacillus]

This may sound stupid but try burning the dvd on a different burner as some burner chipsets are more likely to burn a dvd that fully readable on your rns510 trhan others.

[RetroRaz]

I would only use verbatim and nothing else.

Could be a corrupt download. Would try downloading again and as said above try a different burner.

[Kiwi]

Thanks guys for all your suggestions help,

I'll try downloading it again.

Will download IMG Burn again

I'll try all of this on a different PC

Fingers crossed for tomorrow and I try this all again................................

[Kiwi]

Well I've tried everything,  to no avail......


So 2xLaptops and 1X Home PC later and I'm still stuck, oohh did I mention 10 discs too and 2 lots of Firmware 3810a and 4120

and all I get is error



Then this



But it says this




Dis-heartened doesn't come close...........

Any ideas on what to do, or links to something

[skard]

If I recall you have to load 3810 to get the new partition layout, then 4120 thereafter.
I have 4020 on mine.

[bacillus]

What format is your clock time? If 24 hr try changing it to 12 hr and then try the update again.

[Kiwi]

If I recall you have to load 3810 to get the new partition layout, then 4120 thereafter.
I have 4020 on mine.

If I recall you have to load 3810 to get the new partition layout, then 4120 thereafter.
I have 4020 on mine.

I've also had and been trying 3810a firmware update, and still same errors

[RetroRaz]

What fw are you on at the moment?

If you're on something really low then it may be worth trying a lower fw first like a 2760. And then upgrade to 3810



Sent from my GT-I9300 using Tapatalk 2