Will this Neuspeed throttle pipe fit with..

[berg]

the Forge silicone throttle body hose?

http://www.awesomegti.com/car/vw/golfmk5/neuspeed-hi-flow-intercooler-pipe-coversion-2-0t

I'm guessing it should as the Forge item is same diameter as the oem throttle body hose? and that the Revo/BSH one wont fit because there pipe seems to come with its own special diameter hose?

Might see if Alex can make me one anyway 

[bacillus]

It should seeing it fits the standard diameter oem TB hose.

[bacillus]

btw it's ^^a very tight fit and it only clears the small radiator fan by a couple of mm with little room for adjustment.

[berg]

thanks ayoub 

think will leave it as interested to see if Alex can make a despoke one for me as per Sub and Mike getting one too 

[Tfsi_Mike]

thanks ayoub 

think will leave it as interested to see if Alex can make a despoke one for me as per Sub and Mike getting one too 

Looking forward to getting mine done 

[ROH ECHT]

Yes it fits...I've been removing the raised circumference seal from all of the ends of my Neuspeed tubes lately for less flow disturbance. The Forge T/B hose will allow me to complete all 3 tubes. My turbo outlet(just one end) and intake(both ends) are done...plus you'll find the hoses are easier to slide on. Used a Dremel on them with a cutting disc.

[berg]

thanks ayoub 

think will leave it as interested to see if Alex can make a despoke one for me as per Sub and Mike getting one too 

Looking forward to getting mine done 

has alex made your up already Mike? We have lift off for Monday in case you did not know 

[Tfsi_Mike]

I'm not sure Andy I'm trying not to pester him

Woo hoo! 

[gazon69]

Just buy the revo/bcs one. Comes with w/m ports too

[berg]

Just buy the revo/bcs one. Comes with w/m ports too

i dont think that will fit with the forge silicone throttle body hose tho will it? the picture seems to suggest that pipe comes with its one bit of silicone pipe?