Make a donation

Author Topic: Wheel geometry problem  (Read 2569 times)

Offline Black9

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 35
  • -Receive: 19
  • Posts: 1014
    • Email
Wheel geometry problem
« on: March 14, 2013, 07:58:05 pm »
Hoping someone can help me with this.. Had my wheel geo setup last week all within VW spec. I left the garage which carried out the four wheel geo setup and noticed my steering wheel was offset to the left, for the car to drive straight. If I hold the wheel dead straight the car will veer off to the the right.

Called the garage up the day after and told him about the problem. He told me to give it a 100 miles or so as the tyres may have worn unevenly causing the issue. I gave it almost 200 miles and went back today to have the car checked over again...

The car was setup and showed up on the computer as no faults and everything within VW spec. The tech told me the issue maybe the cars, electric steering wheel angle sensor may need re-calibrated??? Never heard this before, does this sound right???

I've used this garage many times and had no issues before. The cars never been in an accident and aligned up perfect 5-6 times before at the same garage. The machine he uses is a Jim Bean? And it's a proper 4 wheel geo setup...

Can anyone recommend what I should do next?

Offline Jussa

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 23
  • -Receive: 12
  • Posts: 1051
  • Bicester
    • Email
Re: Wheel geometry problem
« Reply #1 on: March 14, 2013, 08:07:53 pm »
Go to a specialist garage that only deals in 4 wheel geometry.
I had the same issue with my old MK5 GTi, took it to 3 garages and still had the issue you had.  Went to a specialist and it was all sorted.
2010 3dr phantom black S-Tronic S3 - BCS TBE with 3½" DP - LOBA LO4xx turbo - LOBA HPFP - Revo CAI - H&R 25mm lowering springs - Forge 11mm spacers - RS4 fuel Pressure valve - THS intercooler - H&R front and rear ARB's - AEM water methanol injection

Offline Black9

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 35
  • -Receive: 19
  • Posts: 1014
    • Email
Re: Wheel geometry problem
« Reply #2 on: March 14, 2013, 08:21:01 pm »
This guy is a specialist. All he does is four wheel alignment. Prob been doing it for the past 20/30 years. Not sure where to go from here

Offline daz05

  • Taking part
  • ***
  • Thank You
  • -Given: 1
  • -Receive: 0
  • Posts: 38
    • Email
Re: Wheel geometry problem
« Reply #3 on: March 14, 2013, 08:33:25 pm »
He hasn't done the job properly, or his equipment is off, no other excuse. Was the thrust angle 0 deg?
« Last Edit: March 14, 2013, 08:36:06 pm by daz05 »
Black 5 door Mk5 GTI

Offline Jussa

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 23
  • -Receive: 12
  • Posts: 1051
  • Bicester
    • Email
Re: Wheel geometry problem
« Reply #4 on: March 14, 2013, 08:36:54 pm »
He hasn't done the job properly, no other excuse. Was the thrust angle 0 deg?

I agree, I went to a specialist with 1 million quid equipment, computerised screens etc.... You could sit down in the waiting room and watch your alignment being done on a plasma, best £90 I ever spent!!   :happy2:
2010 3dr phantom black S-Tronic S3 - BCS TBE with 3½" DP - LOBA LO4xx turbo - LOBA HPFP - Revo CAI - H&R 25mm lowering springs - Forge 11mm spacers - RS4 fuel Pressure valve - THS intercooler - H&R front and rear ARB's - AEM water methanol injection

Offline camfollower

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 10
  • -Receive: 31
  • Posts: 556
  • Cam follower awareness.
Re: Wheel geometry problem
« Reply #5 on: March 14, 2013, 08:40:34 pm »
He hasn't done the job properly, no other excuse. Was the thrust angle 0 deg?

I agree, I went to a specialist with 1 million quid equipment, computerised screens etc.... You could sit down in the waiting room and watch your alignment being done on a plasma, best £90 I ever spent!!   :happy2:

Where, who was that mate?

Offline andygo

  • Always Involved
  • ****
  • Thank You
  • -Given: 3
  • -Receive: 8
  • Posts: 230
    • Email
Re: Wheel geometry problem
« Reply #6 on: March 14, 2013, 08:42:43 pm »
Swap the front tyres onto the back. See what happens then.

Offline Jussa

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 23
  • -Receive: 12
  • Posts: 1051
  • Bicester
    • Email
Re: Wheel geometry problem
« Reply #7 on: March 14, 2013, 08:44:17 pm »
He hasn't done the job properly, no other excuse. Was the thrust angle 0 deg?

I agree, I went to a specialist with 1 million quid equipment, computerised screens etc.... You could sit down in the waiting room and watch your alignment being done on a plasma, best £90 I ever spent!!   :happy2:

Where, who was that mate?

They're called RSR tyres and wheels in Bromley, but they have other branches  :happy2:
2010 3dr phantom black S-Tronic S3 - BCS TBE with 3½" DP - LOBA LO4xx turbo - LOBA HPFP - Revo CAI - H&R 25mm lowering springs - Forge 11mm spacers - RS4 fuel Pressure valve - THS intercooler - H&R front and rear ARB's - AEM water methanol injection

Offline Black9

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 35
  • -Receive: 19
  • Posts: 1014
    • Email
Re: Wheel geometry problem
« Reply #8 on: March 14, 2013, 08:53:30 pm »
If I email someone a pic on here do they mind posting it up in this thread. May help shed some light

Offline Jussa

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 23
  • -Receive: 12
  • Posts: 1051
  • Bicester
    • Email
Re: Wheel geometry problem
« Reply #9 on: March 14, 2013, 08:56:14 pm »
Under normal circumstances I'd do it mate, but currently in Katowice Poland so don't have the luxuries I normally have at nome  :innocent:
2010 3dr phantom black S-Tronic S3 - BCS TBE with 3½" DP - LOBA LO4xx turbo - LOBA HPFP - Revo CAI - H&R 25mm lowering springs - Forge 11mm spacers - RS4 fuel Pressure valve - THS intercooler - H&R front and rear ARB's - AEM water methanol injection

Offline chrisr763

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 0
  • -Receive: 62
  • Posts: 1777
    • Email
Re: Wheel geometry problem
« Reply #10 on: March 14, 2013, 09:00:38 pm »
Email me a pic. PM me and il get my email address over to you :)

Offline E30Dom

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 42
  • -Receive: 76
  • Posts: 2100
Re: Wheel geometry problem
« Reply #11 on: March 14, 2013, 09:01:09 pm »
Anywhere near brackley? Go to APS Brackley, they do spot on alignment!
Diesel Daily Hack.

Offline Black9

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 35
  • -Receive: 19
  • Posts: 1014
    • Email
Re: Wheel geometry problem
« Reply #12 on: March 14, 2013, 09:09:53 pm »
I'm in edinburgh. Ill get a pic posted soon

Offline chrisr763

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 0
  • -Receive: 62
  • Posts: 1777
    • Email
Re: Wheel geometry problem
« Reply #13 on: March 14, 2013, 10:48:51 pm »


 :happy2:

Offline vRSAlex

  • Admin
  • Just look at my post count
  • *
  • Thank You
  • -Given: 39
  • -Receive: 253
  • Posts: 2761
    • Email
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,19941.0.html
Re: Wheel geometry problem
« Reply #14 on: March 15, 2013, 08:00:00 am »


 :happy2:

Rear end needs some work.  They haven't even bothered to adjust it.
www.akstuning.co.uk - info@akstuning.com - 01234 822324
Follow AKS tuning on Facebook