General > Product Reviews
"Schroth Quickfit removable 4-point harness" By Tony Danza
RedRobin:
^^^^
Thanks, Mike :happy2:
Abi is going to contact Schroth to find out about torque settings but we are collectively thinking that as it's not stated in the German instructions (as far as we can see), then it's not critical. Probably just tighten with human arm until it won't go any further without using extra force or stripping the bolt - Rather like the Recaro seats on the floor.
@ TC - For us guys with Recaro's, it's best to undo all the quick release parts and fold and feed through the Recaro slots from the rear. :smiley:
tony_danza:
I checked it once and basically it's pretty much as tight as you can get it with a rachet - I've had the seats in and out that many times now I just do it up as hard as I can. You'll not strip the thread on those bad boys!
You'll need to bend the buckle for the front one, vice and a set of grips will do the trick. It tells you how to do it in the instructions.
RedRobin:
^^^^
Ah, I wondered what that bending illustration was all about.
I haven't got the appropriate tools to install so I'll have to visit my mate who reupholstered my Recaro's or wait til my next visit to VWR. Or....If you could tell me which size 'star' bolt bit to get I could buy one.
tony_danza:
Tools required and a guide for the back seat out here
Front one, simply pull the carpet back from the sill cover and it's towards the front of the slider rail - 6" extention will help here.
RedRobin:
^^^^
Brilliant, Mike! :drinking:
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version