Make a donation
« previous next »
Pages: [1]   Go Down

Author Topic: just a quickie  (Read 1157 times)

Offline DubwayDan

  • Always Involved
  • ****
  • Thank You
  • -Given: 3
  • -Receive: 1
  • Posts: 286
    • Email
just a quickie
« on: July 24, 2009, 05:04:04 pm »
hi guys, just bought a set of splits for my mk5 but they are pcd 5x120 and ET35...

just wondering what can be done to these? can the holes for the wheel bolt be welded up and re-drilled to 5x112?

also would it be possible to machine the centre back to gain a higher offset?

cheers, dan  :wink:
Logged

Offline Top Cat

  • Top cat
  • Just look at my post count
  • ******
  • Thank You
  • -Given: 171
  • -Receive: 335
  • Posts: 8196
  • Almost Jacamo
Re: just a quickie
« Reply #1 on: July 24, 2009, 05:07:55 pm »
I think you can just get wobble bolts for fitting the different PCD
What width are the wheels.
Logged

Offline DubwayDan

  • Always Involved
  • ****
  • Thank You
  • -Given: 3
  • -Receive: 1
  • Posts: 286
    • Email
Re: just a quickie
« Reply #2 on: July 24, 2009, 05:09:35 pm »
the wheels are 8" wide all round, 3 peice splits would 112 to 120 not be too much difference for wobble bolts?
Logged

Offline Top Cat

  • Top cat
  • Just look at my post count
  • ******
  • Thank You
  • -Given: 171
  • -Receive: 335
  • Posts: 8196
  • Almost Jacamo
Re: just a quickie
« Reply #3 on: July 24, 2009, 05:16:16 pm »
The width helps the offset it makes them 4 mil further out than mine so thats not to bad by your standards.  :laugh: will defo get rubbing again though.
I cant help with the PCD thing but i have heard of people doing what you mention. Maybe try asking on wheel whores.  :smiley:
I wouldn't fancy making the back plate of the wheel thinner.  :scared:
Logged
Pages: [1]   Go Up
« previous next »