All Things Mk5 > Other VAG
Audi TT by _Dejan_ (Stage 3 = 340 HP)
_Dejan_:
It is time for another small update...
Im receive some new parts...
Aquamist 4-way hex manifold:
Aquamist 1bar Checkvalve with compression fittings:
Aquamist 140cc Checkvalve jet(I will running 4x140cc in intake manifold) with 90°compress fitting:
Im start modification of new intake manifold:
Jet adaptors are test fitted and must remove them and prepare manifold to final fit and glue adapters...
_Dejan_:
Im glue adapters into manifold:
Few days before I start with summer vacations Im receive Aquamist HFS4 kit:
WMI pump:
Gauge installed into OSIR O-Pod Mono:
HFS 4 controller:
_Dejan_:
Here is some small update :)
Because of design of dashboard air vent Im cut original to block airflow of vent which I use for gauge. Now I don't lose cooling efect on other dashboard vents ...
Blocked hole:
Gauge mounted:
And Intake Manifold prepared for install(Jets mounted and connected):
_Dejan_:
Here is new update...
First Im modify Spulen throttle pipe pipe and add adapter for WMI jet:
Then Im remove intake manifold and install modified one:
After that Im start installing HFS-4 kit.
First Im modify original washer fluid reservoir:
Then Im prepare case for wmi pump and relay:
Connect everything together(hoses, wires to ECU):
At same time Im also install CTS Diverter Valve Kit:
Now I need to tune system make a lot of logging...
Molesy:
Great car and great mods, thanks for keeping us all informed on your progress! :smiley:
Molesy :happy2:
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version