Make a donation
« previous next »
Pages: [1] 2   Go Down

Author Topic: Rubbing issues with BBS VZ and 996tt brakes...  (Read 2604 times)

Offline berg

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 49
  • -Receive: 38
  • Posts: 1681
Rubbing issues with BBS VZ and 996tt brakes...
« on: March 30, 2013, 01:48:10 pm »
Finally fitted my VZ today with new rubber after taking winter tyres off.

Mike's 996tt kit was put on by Alex the other week.

The alloys go on with a spacer but I thought QD managed to fit a BBK with VZ without spacer (Dave B to confirm how?)
 
Rubbing occurs when hitting a piece of road which is not even at a fair speed, I have already done the screw arch mod.

Just spoken to Alex briefly about this so do I now need to consider getting my arches rolled or does anyone have any other trick solutions?  :sad1:
Logged
Diamond Black Pearl Edition 30, still going strong but now back to Stg 1

Offline Greeners

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 201
  • -Receive: 199
  • Posts: 8812
    • Email
Re: Rubbing issues with BBS VZ and 996tt brakes...
« Reply #1 on: March 30, 2013, 02:00:28 pm »
What size tyres do you have on?
Logged

Offline berg

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 49
  • -Receive: 38
  • Posts: 1681
Re: Rubbing issues with BBS VZ and 996tt brakes...
« Reply #2 on: March 30, 2013, 04:15:31 pm »
Quote from: Greeners on March 30, 2013, 02:00:28 pm
What size tyres do you have on?


hi nath, just the normal 225/40/18 pal
Logged
Diamond Black Pearl Edition 30, still going strong but now back to Stg 1

Offline JoeDarKa

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 57
  • -Receive: 73
  • Posts: 3188
Re: Rubbing issues with BBS VZ and 996tt brakes...
« Reply #3 on: March 30, 2013, 05:03:57 pm »
What size spacers are they?
Logged


GT Sport - Reflex Silver 2.0 TDI My Build

Offline berg

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 49
  • -Receive: 38
  • Posts: 1681
Re: Rubbing issues with BBS VZ and 996tt brakes...
« Reply #4 on: March 30, 2013, 06:13:00 pm »
Quote from: JoeDarKa on March 30, 2013, 05:03:57 pm
What size spacers are they?


Hi joe, 10mm h & r.

could maybe get away with 8mm but dont think calipers will fit over anything much smaller...
Logged
Diamond Black Pearl Edition 30, still going strong but now back to Stg 1

Offline Greeners

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 201
  • -Receive: 199
  • Posts: 8812
    • Email
Re: Rubbing issues with BBS VZ and 996tt brakes...
« Reply #5 on: March 30, 2013, 06:25:40 pm »
To be honest with the lower offset and wider wheel you'll definitely get some rubbing as the wheels will be sticking out nearly 20mm more than the oem!

I'd go for the lowest spacer you can get away with.
Logged

Offline fab5freddy

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 238
  • -Receive: 239
  • Posts: 2033
Re: Rubbing issues with BBS VZ and 996tt brakes...
« Reply #6 on: March 30, 2013, 09:20:01 pm »
Plus you have the TT arms Andy, that's pushing you out another 7mm over stock
Logged

Offline berg

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 49
  • -Receive: 38
  • Posts: 1681
Re: Rubbing issues with BBS VZ and 996tt brakes...
« Reply #7 on: March 30, 2013, 10:56:19 pm »
Quote from: fab5freddy on March 30, 2013, 09:20:01 pm
Plus you have the TT arms Andy, that's pushing you out another 7mm over stock


ah good point james, not thought of that
Logged
Diamond Black Pearl Edition 30, still going strong but now back to Stg 1

Offline rex

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 50
  • -Receive: 74
  • Posts: 1307
Re: Rubbing issues with BBS VZ and 996tt brakes...
« Reply #8 on: March 30, 2013, 11:09:44 pm »
Best sotion: Kerscher fenders (or similar)! Doubt anything other than a 20mm wider fender will be ok!
My car has a similar setup and I can not imagine how much rubbing would be with ET 34 rim (ET44 + 10mm spacer) and TT arms.
Logged

Offline berg

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 49
  • -Receive: 38
  • Posts: 1681
Re: Rubbing issues with BBS VZ and 996tt brakes...
« Reply #9 on: March 30, 2013, 11:11:32 pm »
Quote from: rex on March 30, 2013, 11:09:44 pm
Best sotion: Kerscher fenders (or similar)! Doubt anything other than a 20mm wider fender will be ok!
My car has a similar setup and I can not imagine how much rubbing would be with ET 34 rim (ET44 + 10mm spacer) and TT arms.


thanks for the info rex, what or where may i find these kerscher fenders??
Logged
Diamond Black Pearl Edition 30, still going strong but now back to Stg 1

Offline rex

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 50
  • -Receive: 74
  • Posts: 1307
Re: Rubbing issues with BBS VZ and 996tt brakes...
« Reply #10 on: March 31, 2013, 10:31:29 am »
There are two threads:
Wide fenders for mk5 GTI: with a Kerscher fender (25mm more clearance) review
Carbon Wings - Feeler for GB.... : with carbon fenders (10mm more clearance) review
Jake (danishmkvgti) had the carbon wings but they were not ok and we went for the Kerscher ones...
Logged

Offline danishmkvgti

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 243
  • -Receive: 154
  • Posts: 3680
    • Email
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,7823.0.html
Re: Rubbing issues with BBS VZ and 996tt brakes...
« Reply #11 on: March 31, 2013, 12:15:49 pm »
Quote from: rex on March 31, 2013, 10:31:29 am
There are two threads:
Wide fenders for mk5 GTI: with a Kerscher fender (25mm more clearance) review
Carbon Wings - Feeler for GB.... : with carbon fenders (10mm more clearance) review
Jake (danishmkvgti) had the carbon wings but they were not ok and we went for the Kerscher ones...

I would not advice the Carbon fenders, but Kerscher is a top quality kit, and you will avoid rust in them  :wink:
Logged

Over the top mod list ;o)

Offline berg

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 49
  • -Receive: 38
  • Posts: 1681
Re: Rubbing issues with BBS VZ and 996tt brakes...
« Reply #12 on: April 12, 2013, 10:08:38 am »
got 3mm tpi spacers on yesterday and hoping this will have solved the issue.

so for anyone wanting to put these brakes on with vz you will need a spacer if you have TT arms fitted, but if you have the Gti arms you will probably get the BBK under the VZ with no spacer a la QD (MBE)  :happy2:
Logged
Diamond Black Pearl Edition 30, still going strong but now back to Stg 1

Offline danishmkvgti

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 243
  • -Receive: 154
  • Posts: 3680
    • Email
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,7823.0.html
Re: Rubbing issues with BBS VZ and 996tt brakes...
« Reply #13 on: April 12, 2013, 06:14:18 pm »
Quote from: berg on April 12, 2013, 10:08:38 am
got 3mm tpi spacers on yesterday and hoping this will have solved the issue.

so for anyone wanting to put these brakes on with vz you will need a spacer if you have TT arms fitted, but if you have the Gti arms you will probably get the BBK under the VZ with no spacer a la QD (MBE)  :happy2:

TT arms does absolutly no difference regarding spacer/brake-wheel clearance.
They are only an issue regarding clearance between tyre and front wing/fender  :happy2:
Logged

Over the top mod list ;o)

Offline berg

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 49
  • -Receive: 38
  • Posts: 1681
Re: Rubbing issues with BBS VZ and 996tt brakes...
« Reply #14 on: April 13, 2013, 11:54:58 am »
Quote from: danishmkvgti on April 12, 2013, 06:14:18 pm
Quote from: berg on April 12, 2013, 10:08:38 am
got 3mm tpi spacers on yesterday and hoping this will have solved the issue.

so for anyone wanting to put these brakes on with vz you will need a spacer if you have TT arms fitted, but if you have the Gti arms you will probably get the BBK under the VZ with no spacer a la QD (MBE)  :happy2:

TT arms does absolutly no difference regarding spacer/brake-wheel clearance.
They are only an issue regarding clearance between tyre and front wing/fender  :happy2:


sorry, my problem was twofold - rubbing with a 10mm spacer and not clearing the brake caliper with no spacer, the 3mm spacer has solved both issues  :pomppomp:
Logged
Diamond Black Pearl Edition 30, still going strong but now back to Stg 1
Pages: [1] 2   Go Up
« previous next »