Make a donation

Author Topic: Revo flat spots  (Read 625 times)

Offline Pikey Motorsports

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 29
  • -Receive: 33
  • Posts: 1793
Revo flat spots
« on: March 30, 2013, 05:54:51 pm »
had stage 2 done last week, get a very small flatspot at approx 5.5k-6ish

thought this was only a heard of problem on 2+ and the rs4 valve helps but not needed for stage 2?

any thoughts could it be the settings?
TSR PERFORMANCE GTX30 520BHP
LITCHFIELD R35 GT-R 660BHP
MSL E63 AMG 720BHP
HCP BM3 M5 800BHP

Offline bacillus

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 4
  • -Receive: 451
  • Posts: 6327
Re: Revo flat spots
« Reply #1 on: March 30, 2013, 08:24:56 pm »
Folk may say put a rs4 prv in but to get some learned opinions you will need to post up some logs of boost, timing, N75 duty cycle, rail pressure for hpfp and lpfp at minimum.
Without traction power is nothing!

Offline dokez

  • Always Involved
  • ****
  • Thank You
  • -Given: 1
  • -Receive: 3
  • Posts: 235
    • Email
Re: Revo flat spots
« Reply #2 on: March 30, 2013, 09:20:54 pm »
I changed my boost setting to 8 rather then 9 and its pretty much gone.




Lee M

  • Guest
Re: Revo flat spots
« Reply #3 on: March 31, 2013, 09:45:15 am »
I changed my boost setting to 8 rather then 9 and its pretty much gone.

When I was stage 1 I had a similar issue (sporadic) and turning the boost down by one cured it.

I thought REVO had released updated software that pretty much eradicated the flat spot?

Offline rich83

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 165
  • -Receive: 802
  • Posts: 13444
    • MK5 Golf GTI
  • My Ride: https://www.mk5golfgti.co.uk/forum/index.php?PHPSESSID=e4sg3d55llbutoqjebfn52pkc7&/topic,19740.0.html
Re: Revo flat spots
« Reply #4 on: March 31, 2013, 09:47:18 am »
Shouldnt need the RS4 valve really....

Offline n0ble

  • Taking part
  • ***
  • Thank You
  • -Given: 0
  • -Receive: 0
  • Posts: 34
    • Email
Re: Revo flat spots
« Reply #5 on: April 01, 2013, 08:24:56 pm »
RS4 Fuel Valve will not cure your flat spots, you need revo to do a logging session and see whats going wrong.

Your cam follower and HPFP ok?