Make a donation
« previous next »
Pages: [1]   Go Down

Author Topic: Cheap mandrel bending sheffield area?  (Read 1289 times)

Offline tommygti

  • Always Involved
  • ****
  • Thank You
  • -Given: 22
  • -Receive: 9
  • Posts: 445
    • Email
Cheap mandrel bending sheffield area?
« on: April 16, 2013, 07:42:04 pm »
Anyone know of anywhere in the sheffield region that does cheap mandrel bending? Cheers
Logged

Offline PDT

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 3
  • -Receive: 142
  • Posts: 2010
    • Email
Re: Cheap mandrel bending sheffield area?
« Reply #1 on: April 18, 2013, 06:56:14 pm »
Exhausts uk  :happy2:
Logged

Offline tommygti

  • Always Involved
  • ****
  • Thank You
  • -Given: 22
  • -Receive: 9
  • Posts: 445
    • Email
Re: Cheap mandrel bending sheffield area?
« Reply #2 on: April 18, 2013, 07:05:11 pm »
Quote from: PDT on April 18, 2013, 06:56:14 pm
Exhausts uk  :happy2:

All ready tried. I need a ss 25mm tube mandrel bend and they cant bend anything of that small diameter. Cheers anyway
Logged

Offline Edition30

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 6
  • -Receive: 8
  • Posts: 633
  • No man was ever wise by chance.
    • Email
Re: Cheap mandrel bending sheffield area?
« Reply #3 on: April 18, 2013, 10:37:48 pm »
What do you need doing?

Have a section roller at work. Just depends what you need.
Logged
Afghanistan Trust - Yorkshire 3 peaks challenge.

www.justgiving.com/ptemartinbell

MyProtein - MP119633

Offline tommygti

  • Always Involved
  • ****
  • Thank You
  • -Given: 22
  • -Receive: 9
  • Posts: 445
    • Email
Re: Cheap mandrel bending sheffield area?
« Reply #4 on: April 18, 2013, 11:19:23 pm »
Quote from: Edition30 on April 18, 2013, 10:37:48 pm
What do you need doing?

Have a section roller at work. Just depends what you need.

I need a custom dv relocate pipe made. Similar to eurojets. Only needs 3-4 bend in it but if that is too difficult to do 4 bends all at different angles then I could split the bending into two parts and then weld it together again. I also will need a custom high-flow intercooler to tb pipe bent but that will be 60mm wide ss pipe and requires 1-2 bends.

Similar to these:



Logged
Pages: [1]   Go Up
« previous next »