Make a donation
« previous next »
Pages: [1]   Go Down

Author Topic: Brake Light Switch DIY  (Read 1094 times)

Offline Kalpesh

  • Always Involved
  • ****
  • Thank You
  • -Given: 1
  • -Receive: 0
  • Posts: 106
Brake Light Switch DIY
« on: June 07, 2013, 02:44:51 pm »
Hi all,

Has anyone done this or have links to a DIY?
Logged

Offline Neiltdi

  • Always Involved
  • ****
  • Thank You
  • -Given: 14
  • -Receive: 8
  • Posts: 210
  • Full Hex+CAN
    • Email
Re: Brake Light Switch DIY
« Reply #1 on: June 07, 2013, 03:33:59 pm »
it is soooooo simple , take the plug off , twist it about 45 degrees and pull it will come out , then if you buy from dealers you get instructions with a new switch as they are delicate.

GL
Logged
Full Hex+CAN in Hampshire.

Offline Kalpesh

  • Always Involved
  • ****
  • Thank You
  • -Given: 1
  • -Receive: 0
  • Posts: 106
Re: Brake Light Switch DIY
« Reply #2 on: June 07, 2013, 03:35:44 pm »
Hi mate,

Thanks for the reply, got one from the dealer this morning no instructions though
Logged

Offline Neiltdi

  • Always Involved
  • ****
  • Thank You
  • -Given: 14
  • -Receive: 8
  • Posts: 210
  • Full Hex+CAN
    • Email
Re: Brake Light Switch DIY
« Reply #3 on: June 07, 2013, 05:25:41 pm »
Hmm that's odd.

Basically it says not to adjust it as you can break it .

But all you have to do is push it in and twist it to lock it in place ten plug the plug in and it should work
Logged
Full Hex+CAN in Hampshire.

Offline Kalpesh

  • Always Involved
  • ****
  • Thank You
  • -Given: 1
  • -Receive: 0
  • Posts: 106
Re: Brake Light Switch DIY
« Reply #4 on: June 07, 2013, 06:04:28 pm »
Done :)
Logged
Pages: [1]   Go Up
« previous next »