Make a donation
« previous next »
Pages: [1]   Go Down

Author Topic: will they fit?  (Read 1932 times)

Offline biffobear

  • Always Involved
  • ****
  • Thank You
  • -Given: 2
  • -Receive: 12
  • Posts: 367
    • Email
will they fit?
« on: May 21, 2013, 09:15:35 pm »
http://thumbs.ebaystatic.com/d/l140/pict/230958321194_1.jpg like this wheel, will it fit k with wobble bolts and clear my big brakes?XXR 527 18" x 8.75J ET20
Logged

Offline JoeDarKa

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 57
  • -Receive: 73
  • Posts: 3188
Re: will they fit?
« Reply #1 on: May 21, 2013, 09:44:33 pm »
ET20 is far too low i think
Logged


GT Sport - Reflex Silver 2.0 TDI My Build

Offline biffobear

  • Always Involved
  • ****
  • Thank You
  • -Given: 2
  • -Receive: 12
  • Posts: 367
    • Email
Re: will they fit?
« Reply #2 on: May 21, 2013, 09:47:46 pm »
so what problem would that cause?, stick out too much or catch the struts?
Logged

Offline JoeDarKa

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 57
  • -Receive: 73
  • Posts: 3188
Re: will they fit?
« Reply #3 on: May 21, 2013, 09:49:29 pm »
Too much poke i think
Logged


GT Sport - Reflex Silver 2.0 TDI My Build

Offline Biano44

  • Always Involved
  • ****
  • Thank You
  • -Given: 12
  • -Receive: 14
  • Posts: 470
  • The CC GT 200
Re: will they fit?
« Reply #4 on: May 21, 2013, 10:22:37 pm »
Logged

Offline Jabarton99

  • Always Involved
  • ****
  • Thank You
  • -Given: 7
  • -Receive: 3
  • Posts: 79
Re: will they fit?
« Reply #5 on: May 21, 2013, 10:55:21 pm »
I had some 18x8.5 with et30 and the rears stuck out of the arch by about 1" which is a lot. The fronts were fine but the rears just looked stupid.
Logged
R32 Recaro bucket seats (individual colour), Golf R MFSW with cream stitching, Cream stitched gear gaitor to match, RNS510, highline cluster, Ko4 turbo, Forge twintercooler, Forge oil catch can & washer bottle, Autotech fuel pump, Neuspeed power pully, S3 injectors, ITG maxogen intake, Red top coil packs, Milltek Full 3" exhaust straight through. AP Coilovers, H & R Anti roll bars, Tarox 10pot calipers front & S3 rear calipers rear.

Offline Jabarton99

  • Always Involved
  • ****
  • Thank You
  • -Given: 7
  • -Receive: 3
  • Posts: 79
Re: will they fit?
« Reply #6 on: May 21, 2013, 10:57:07 pm »
If you want I have a picture somewhere of the rear wheel looking down at the arch. Can send it on a email if you want. Just let me know.
Logged
R32 Recaro bucket seats (individual colour), Golf R MFSW with cream stitching, Cream stitched gear gaitor to match, RNS510, highline cluster, Ko4 turbo, Forge twintercooler, Forge oil catch can & washer bottle, Autotech fuel pump, Neuspeed power pully, S3 injectors, ITG maxogen intake, Red top coil packs, Milltek Full 3" exhaust straight through. AP Coilovers, H & R Anti roll bars, Tarox 10pot calipers front & S3 rear calipers rear.

Offline xjay1337

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 15
  • -Receive: 377
  • Posts: 4916
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,88399.0.html
Re: will they fit?
« Reply #7 on: May 21, 2013, 11:07:50 pm »
7.5 et20 on the front will not work.

I put my spacers on my front once just to see how it would look and at 7.5 et36 I was pretty flush, so add another 15mm.. unless you roll your arches and have pretty big stretch (which you can't find in a 7.5 rim really) it won't work.
Logged

Offline biffobear

  • Always Involved
  • ****
  • Thank You
  • -Given: 2
  • -Receive: 12
  • Posts: 367
    • Email
Re: will they fit?
« Reply #8 on: May 22, 2013, 04:17:46 pm »
don't want to start messing around with the arches, lookin for wheels similar to this, but cheaper than Rota equivilant.
Logged
Pages: [1]   Go Up
« previous next »