« Reply #8 on: May 23, 2013, 06:57:11 pm »
It also depends on the wheel as I tested some rial daytona that were 8.5 et 30 and the fronts could have done with been et40 however the rears stuck out of the arch by about 20mm so looked silly. If you like a lot of poke they would have been fine but poke is not me.
However when awesome gti fitted them on the test they said the wheel with a et40 wouldn't have gone over my calipers. Just be careful is what I'm trying to say.
Logged
R32 Recaro bucket seats (individual colour), Golf R MFSW with cream stitching, Cream stitched gear gaitor to match, RNS510, highline cluster, Ko4 turbo, Forge twintercooler, Forge oil catch can & washer bottle, Autotech fuel pump, Neuspeed power pully, S3 injectors, ITG maxogen intake, Red top coil packs, Milltek Full 3" exhaust straight through. AP Coilovers, H & R Anti roll bars, Tarox 10pot calipers front & S3 rear calipers rear.
