Number plate help

[sf1506]

Im wanting to move the number plate from its usual place, and not sure where to put it.
Does anybody have any ideas? I would like to remove it at shows so needs to come off quite easy.

[JoeDarKa]

Magnets. There is no other good place to put it

[sf1506]

Are magnets strong enough?.

[JoeDarKa]

Some people use them on here who have smoothed grilles. They are usually a specific type

[chowgar]

Are magnets strong enough?.

got mine on magnets and holds fine...

[sf1506]

Where from?

[ripmateyy]

neodymium magnets are the best!! VERY strong!

[sf1506]

Any idea where from?

[Scottymon]

painted on the bonnet

[MC71]

Use either N35 Neodymium magnets (from eBay, linky below to the ones I've got) or Double Sided Suction cups (eBay too, linky below to the ones I bought). I have an American smoothed grill and have both types, suction ones on the car and a magnet plate in the boot in case the other one goes AWOL.

IIRC it will be illegal to place the Number Plate anywhere else than its current position, can't remember why now.  

Link for N35 Neodymium Magnets

~~ Clicky here ~~

Link to the Double Sided Suction Cups

~~ Clicky here ~~

Guide to fitting the magnets.....

~~ Clicky here ~~

Pics of suction cups on my car...

[sf1506]

Thanks mc71 just what I needed 
Looking at yours have you got 6 suction cups on the front

[MC71]

^^^^ yeap, and that's plenty, more than strong enough. If you get the magnets, you'll need at least 12. 6 for the plate and 6 for the reverse of the grill, I used 8 + 8.