Monte's RS Edition30 DSG (seat repair pg17)

[samg77]

Very nice car!

[monte]

New brakes to be fitted soon at AKS 

Hopefully no spacers needed with my CK's but I know ill need em with my O.Z track wheels.

[Andy]

  :notworthy:very very nice Carlos..been looking at these brakes for mine but wasn;t sure about them fitting behind the ck,s
Also been thinking about getting a price on getting my car wrapped like yours but was wondering if you just wash them normal or is there a special way in doing it

[monte]

Hi Andy,

Cheers mate, I'll let you know how they fit behind the CKs 

As for the wrap, pm me if you want it doing around springtime next year 

Just wash as normal, and use common sense. As long as you are aware that it's a wrap and not paint its easy to wash.
Jet wash, 2bucket method, sno-foam are all fine but for obvious reasons don't use a machine polisher on Satin/Matt finishes
(You can polish gloss vinyl with the right pads/compounds)

I will get round to posting up some pics of when I wrapped mine.

[gazbutS3]

Ttrs discs carlo???

[monte]

Yes mate 

[JoeDarKa]

The brakes are lovely

[gazbutS3]

Yes mate 

You are gonna need a spacer pal

[monte]

For the CKs Gaz?

If so what size? 

[Bradders]

Monte, so nice to see another siver Eddy. I like yours so much I may "borrow" some of your styling ideas.
I've often thought that the silver didnt look as good as the other colours, but you have changed my mind. Well done sir.  

[gazbutS3]

For the CKs Gaz?

If so what size? 

Yes the CK's mate, Well we get away with it on mine because I run daveb disks and brackets which move everything 12mm inboard, I get about 6mm clearance, so by my reckoning a 10mm spacer would give you 4mm. We have tried the CK's on another lads S3 with the ttrs discs and they wouldn't fit. Have a look on vagoc mate there is quite a lengthy thread on there about what fits and what doesn't

[monte]

For the CKs Gaz?

If so what size? 

Yes the CK's mate, Well we get away with it on mine because I run daveb disks and brackets which move everything 12mm inboard, I get about 6mm clearance, so by my reckoning a 10mm spacer would give you 4mm. We have tried the CK's on another lads S3 with the ttrs discs and they wouldn't fit. Have a look on vagoc mate there is quite a lengthy thread on there about what fits and what doesn't

Oh Poop 

[gazbutS3]

For the CKs Gaz?

If so what size? 

Yes the CK's mate, Well we get away with it on mine because I run daveb disks and brackets which move everything 12mm inboard, I get about 6mm clearance, so by my reckoning a 10mm spacer would give you 4mm. We have tried the CK's on another lads S3 with the ttrs discs and they wouldn't fit. Have a look on vagoc mate there is quite a lengthy thread on there about what fits and what doesn't

Oh Poop 

have a look at that thread on vagoc mate, might even be worth a pm to DaveB, anyway I can help just shout up

[Edition_slim]

Your new brakes get me a little too exited 
I didn't want to do too much to my Ed30 but yours gives me bad ideas......

[monte]

Well today I sprayed my Track wheels. (Well I made a start) 

I decided to give Plastidip a try after I'd used it on various badges. The process is very very easy. A good clean and a wipe down with IPA is all the prep needed before spraying. No sanding needed.
I'll be finishing the rest tomorrow and then on Wednesday I hope to get them on the car for some photos 

I'm really impressed with the results so far. 


Before:





After a light coat:





One wheel finished: