Just read through your whole build thread mate lovely car you have I hope to get mine that clean soon
Thanks mate. A lot left to go, in my eyes it's far from mint.
I am looking for the end plates on the Votex splitter.. basically it's known as a "fitting kit" that goes on the very end of it and up into the wheel arch. I need this part to complete the look as it looks, to me, unfinished without it. So I'm prepared to pay strong wedge for this small part.. Number 2 in the picture below.
Anyway, moving on from that..
Not sure what I've mentioned of this before but I've been gathering parts for an Audio install.. as one of my closer friends has his own small audio company.
I didn't want to splash loads of cash but at the same time wanted something half decent so I gathered some components..
Got a Rockford Fosgate 10 inch shallow mount sub, a very decent shallow mount sub this cost me £85 brand new -
http://www.rockfordfosgate.com/products/details/r2sd2-10Got a basic but working Edge amp for £30 from a mate.
Bought a Pioneer AVH-2500BT with iPod/iPhone cable for £100!!! - (apparently it's an app radio so can probably work it with my Galaxy S4 as well..). Got this from a really spot on guy local to me for £100 with the Microphone cable and as mentioned the iPod cable, the loom was hard wired so a teeny bit more awkward to wire up to my car, but Jairm is gonna sort this out for me without botching my loom, and also the wheel control box (unfortunately this was £45).
I also have 2 rolls of 20cm by 10m sound deadening as we're going to sound deaden both our cars - so more than enough.
Jairm's been working away like a beaver on my sub box.. he does not want me to put pictures up of this yet but trust me on this it's a really quality product, gobsmacked at the quality of it. It's all made of wood, no fibreglass, we've tried a few configurations, open port, closed port etc, and we've stuck with a closed port as the airspace is VERY tight.
It's all trimmed up already and the fit is completely spot on and works well with the air build, as he's a very handy trimmer if you've seen my interior work. We'll also be re-trimming my top section of the air ride to a more factory looking carpet.
Just as an idea as to what we're doing...
However I was not happy with the large stick out as it did not look OEM so this is completely flush! We're going to fit everything on Sunday, after the Paul Walker Memorial Day I managed to get tickets to.. so will update with plenty of pictures then.