Make a donation

Author Topic: zanio products what's the best process  (Read 1044 times)

Offline gjseb16

  • Always Involved
  • ****
  • Thank You
  • -Given: 3
  • -Receive: 8
  • Posts: 359
    • Email
zanio products what's the best process
« on: June 19, 2013, 09:50:13 pm »
right guys car snow foamed and clayed what would be the next process with zanio products want a really deep shine has recently been polished with machine but want to restore the really wet look to paint any advice on what products would be best and what process first


cheers Gordon

Offline david proctor

  • Taking part
  • ***
  • Thank You
  • -Given: 3
  • -Receive: 7
  • Posts: 40
Re: zanio products what's the best process
« Reply #1 on: June 20, 2013, 12:18:57 pm »
I would do the following:

1. Apply a coat of AIO, leave for 20 mins and buff.
2. Mix Z2  with the ZFX accelerator kit as instructed with the kit.
3. Apply a layer of the ZFX'd Z2 with a Zaino 314 cotton applicator, leave for 30 mins and buff.
4. Wait 30 mins and repeat item 3 above
5. Wait 30 mins and repeat item 3 above
6. Apply a coat of Z8.

You could also apply a coat of Z6 between coats of the ZFX'd Z2.

You could also carry out the process above with Z5 instead of Z2.


There are many many different combinations with the Zaino product range.

Hope the above helps.