Make a donation

Author Topic: New engine in edition 30  (Read 1171 times)

Offline DBILAS

  • Always Involved
  • ****
  • Thank You
  • -Given: 1
  • -Receive: 2
  • Posts: 50
    • Email
New engine in edition 30
« on: July 01, 2013, 04:41:43 pm »
got an edition 30 which needs a rebuild brought 75% of stuff to rebuild it for revo stage 4 with gtx30 turbo

now im debating holding it off untill next winter and enjoying the car a little for the remaining summer.. so the plan in mind now is to buy a new motor and build my existing blown engine next year.. i have been looking at engines and belive the edition 30 is a BYD? i have found a CDL which is from a golf r or s3 i belive? will this go straight in plug and play with no problems i presume it will?

many thanks

Offline DBILAS

  • Always Involved
  • ****
  • Thank You
  • -Given: 1
  • -Receive: 2
  • Posts: 50
    • Email
Re: New engine in edition 30
« Reply #1 on: July 01, 2013, 05:49:35 pm »
anyone?

Offline Top Cat

  • Top cat
  • Just look at my post count
  • ******
  • Thank You
  • -Given: 171
  • -Receive: 335
  • Posts: 8196
  • Almost Jacamo
Re: New engine in edition 30
« Reply #2 on: July 01, 2013, 10:08:16 pm »
I would contact Statlers if i was you, they have done many of these engine swaps.  :happy2:

Offline DBILAS

  • Always Involved
  • ****
  • Thank You
  • -Given: 1
  • -Receive: 2
  • Posts: 50
    • Email
Re: New engine in edition 30
« Reply #3 on: July 02, 2013, 07:55:38 pm »
cheers mate.. will give them a call

cant see there being much if any probs though?

Offline martziniuk

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 25
  • -Receive: 18
  • Posts: 584
    • Email
Re: New engine in edition 30
« Reply #4 on: July 02, 2013, 09:25:47 pm »
I think it's a straight swap, just the mapping maybe needs altering.
Do you know why the original blew up?
Mk2 Octavia vRS with K04 conversion, 3"TBE & Decat, APR HPFP, BDM Intake, S3 I/C, Sachs clutch & Unicorn custom map, S3 brakes, AP coilovers, THS mounts.

B8.5 Audi S4 with uprated pulley and unicorn Stage 2

Offline DBILAS

  • Always Involved
  • ****
  • Thank You
  • -Given: 1
  • -Receive: 2
  • Posts: 50
    • Email
Re: New engine in edition 30
« Reply #5 on: July 02, 2013, 09:28:34 pm »
i have revo stage 2+ already on my ecu will it still need mapping mate? and spark plug electrode snapped in engine.. might just rebuild my original engine dont know yet for posative

Offline Sie

  • Always Involved
  • ****
  • Thank You
  • -Given: 13
  • -Receive: 6
  • Posts: 242
    • Email
Re: New engine in edition 30
« Reply #6 on: July 02, 2013, 09:57:38 pm »
Check with boroscope (sp) there is nothing down and run it? A couple of people have had it happen, it is down to worn plugs or poor map IMO.  Or have you had more problems?

Simon
Fettled Laser Blue '05 GTi 5dr

Offline DBILAS

  • Always Involved
  • ****
  • Thank You
  • -Given: 1
  • -Receive: 2
  • Posts: 50
    • Email
Re: New engine in edition 30
« Reply #7 on: July 02, 2013, 10:30:29 pm »
my tuner a revo dealer done a borescope and found some slight damage.. we chucked new plugs in all was okay for a few weeks then started getting some slight missfires on idle.. car run fine otherwise then started burning oil at one point after about 10minutes of it doing this i had to pull over on hard shoulder car is running on 3 now