Make a donation

Author Topic: TT wishbones, S3 hubs, WALK or No WALK?  (Read 690 times)

Offline DAZ1985

  • Always Involved
  • ****
  • Thank You
  • -Given: 9
  • -Receive: 1
  • Posts: 75
TT wishbones, S3 hubs, WALK or No WALK?
« on: July 03, 2013, 08:17:40 am »
Recently picked up some TT wishbones and after some readings about alignment setups I'm unsure weather to leave the ALK off.

The route I'm thinking about taking with my suspension is basically b12 pro kit, rear arb, tt wishbones, s3 hubs

Wet/dry setup for fast road and maybe a few track days, nothing serious though

So do I sell the current WALK and buy superpro console bushes or refit the ALK off the current setup?

Thanks in advance
Tornado ED30 #673 stage1 map, miltek cat back, Sachs clutch, panel filter, WALK, eibach pro kit, s3 brakes all round
309bhp @fly

Offline vRSAlex

  • Admin
  • Just look at my post count
  • *
  • Thank You
  • -Given: 39
  • -Receive: 253
  • Posts: 2761
    • Email
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,19941.0.html
Re: TT wishbones, S3 hubs, WALK or No WALK?
« Reply #1 on: July 03, 2013, 09:42:21 am »
WALK will give too much caster, the SALK will be fine though.

Min of -2.5 degs with the TT arms and S3 hubs iirc on the last car I did.
www.akstuning.co.uk - info@akstuning.com - 01234 822324
Follow AKS tuning on Facebook

Offline DAZ1985

  • Always Involved
  • ****
  • Thank You
  • -Given: 9
  • -Receive: 1
  • Posts: 75
Re: TT wishbones, S3 hubs, WALK or No WALK?
« Reply #2 on: July 03, 2013, 10:15:23 am »
-2.5 deg will drop the front end a little too?

Superpro ALK be a better setup then

Toe parallel or as close too?
Tornado ED30 #673 stage1 map, miltek cat back, Sachs clutch, panel filter, WALK, eibach pro kit, s3 brakes all round
309bhp @fly

Offline DAZ1985

  • Always Involved
  • ****
  • Thank You
  • -Given: 9
  • -Receive: 1
  • Posts: 75
Re: TT wishbones, S3 hubs, WALK or No WALK?
« Reply #3 on: July 03, 2013, 10:30:17 am »
SPF3271K front arm rear bush

Or

SPF3273K front arm rear bush with ALK?
Tornado ED30 #673 stage1 map, miltek cat back, Sachs clutch, panel filter, WALK, eibach pro kit, s3 brakes all round
309bhp @fly

Offline vRSAlex

  • Admin
  • Just look at my post count
  • *
  • Thank You
  • -Given: 39
  • -Receive: 253
  • Posts: 2761
    • Email
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,19941.0.html
Re: TT wishbones, S3 hubs, WALK or No WALK?
« Reply #4 on: July 03, 2013, 03:02:25 pm »
SPF3271K front arm rear bush

Or

SPF3273K front arm rear bush with ALK?

Use the ALOY3273-80K full console kit.  Pop me an email.

Front toe as stock at 0.05 mins.
www.akstuning.co.uk - info@akstuning.com - 01234 822324
Follow AKS tuning on Facebook