Make a donation
« previous next »
Pages: [1]   Go Down

Author Topic: Fitting numberplates  (Read 1210 times)

Offline Tortaruga

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 36
  • -Receive: 105
  • Posts: 1527
Fitting numberplates
« on: July 06, 2013, 09:50:11 am »
Just got some pressed plates, but not sure on the best way to fit. The existing plastic plates are just held with sticky fixers.

Should I use self tappers and go through the plate and bumper? Or stick 'em? Or a combination of both?

Thanks
Logged
'07 Red manual

Offline RetroRaz

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 32
  • -Receive: 194
  • Posts: 2821
    • Email
Re: Re: Fitting numberplates
« Reply #1 on: July 06, 2013, 10:06:04 am »
I used heavy duty velcro from halfords. That stuff is really really strong.

What ever you do use, make sure you clean the surface down properly with some car shampoo and then wipe down using white spirit.

Sent From My Samsung S3
Logged

Offline Tortaruga

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 36
  • -Receive: 105
  • Posts: 1527
Re: Fitting numberplates
« Reply #2 on: July 06, 2013, 10:20:47 am »
Cheers lads I'll put the screwdriver and lump hammer away.  :grin:
Logged
'07 Red manual

Offline Scottymon

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 83
  • -Receive: 125
  • Posts: 2139
  • UnNaturally Aspirated
  • My Ride: http://www.voodish.co.uk/misc/6n/6n-alive1.jpg
Re: Fitting numberplates
« Reply #3 on: July 06, 2013, 10:21:02 am »
Don't drill your nice new plate, stickers/Velcro/magnets :happy2:

Stickers if your not bothered about removing for shows etc. magnets if you are.

Lol, edited my post.
Logged
Pages: [1]   Go Up
« previous next »