Make a donation
« previous next »
Pages: [1]   Go Down

Author Topic: Got a TWINtake? Watch out for this!  (Read 1154 times)

Offline john87

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 11
  • -Receive: 53
  • Posts: 790
    • Email
Got a TWINtake? Watch out for this!
« on: July 10, 2013, 10:15:31 pm »
Tonight I took advantage of the good weather and cleaned out my twintake filters, washed them and left them to dry in the sun. Going back under the bonnet, I noticed that the upper/front-facing filter housing has been rubbing against the engine coolant return hose  :confused:

(ignore the silver duct tape, that was to try and stop the spring clip from wearing through the twintake silicon pipe)





Luckily it hadn't yet worn right through, but this has happened on mine after around 18 months of use.. you can imagine the inconvenience of this hose springing a leak!

Get it checked people  :jumping:
Logged
VCDS Hex-USB +CAN (Central Scotland)

Offline vRSAlex

  • Admin
  • Just look at my post count
  • *
  • Thank You
  • -Given: 39
  • -Receive: 253
  • Posts: 2761
    • Email
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,19941.0.html
Re: Got a TWINtake? Watch out for this!
« Reply #1 on: July 10, 2013, 10:18:14 pm »
Seen many off them with holes in the metal and silicone pipes.   All from the clip on the water pipe rubbing.  Poor design in my eyes.
Logged
www.akstuning.co.uk - info@akstuning.com - 01234 822324
Follow AKS tuning on Facebook

Offline john87

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 11
  • -Receive: 53
  • Posts: 790
    • Email
Re: Got a TWINtake? Watch out for this!
« Reply #2 on: July 10, 2013, 10:42:56 pm »
Quote from: vRSAlex on July 10, 2013, 10:18:14 pm
Seen many off them with holes in the metal and silicone pipes.   All from the clip on the water pipe rubbing.  Poor design in my eyes.

It is that... wearing through the metal pipe too?? VW spring clips must be made of some tough-ass steel..
Logged
VCDS Hex-USB +CAN (Central Scotland)

Offline rich83

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 165
  • -Receive: 802
  • Posts: 13444
    • MK5 Golf GTI
  • My Ride: https://www.mk5golfgti.co.uk/forum/index.php?PHPSESSID=2r96f0e46o26fcsq6odksrnfqc&/topic,19740.0.html
Re: Got a TWINtake? Watch out for this!
« Reply #3 on: July 10, 2013, 10:49:12 pm »
Bad design.... just like the rest of it.  :popcornsoda:
Logged

Offline john87

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 11
  • -Receive: 53
  • Posts: 790
    • Email
Re: Got a TWINtake? Watch out for this!
« Reply #4 on: July 10, 2013, 10:53:23 pm »
The sort of problems that the TWINtake kit cause could have been quite easily picked up if it had been tested on a car for a decent length of time
Logged
VCDS Hex-USB +CAN (Central Scotland)

Saintsteve

  • Guest
Re: Got a TWINtake? Watch out for this!
« Reply #5 on: July 11, 2013, 07:37:52 am »
Quote from: richwig83 on July 10, 2013, 10:49:12 pm
Bad design.... just like the rest of it.  :popcornsoda:


 :indifferent:
Logged

Offline MAT ED30

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 25
  • -Receive: 82
  • Posts: 5728
  • Vwr fan boy
    • Email
Re: Got a TWINtake? Watch out for this!
« Reply #6 on: July 11, 2013, 08:13:34 am »
It is a little bit of a bad design maybe changing the hose design could help
Logged

Mods yes but way too many to stick in this little box

Offline bigmig95

  • Always Involved
  • ****
  • Thank You
  • -Given: 39
  • -Receive: 50
  • Posts: 467
  • I know enough to know that I don't know enough.
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,53191.0.html
Re: Got a TWINtake? Watch out for this!
« Reply #7 on: July 11, 2013, 08:20:36 am »
Quote from: richwig83 on July 10, 2013, 10:49:12 pm
Bad design.... just like the rest of it.  :popcornsoda:

The ITG cannister arrangement has similar issues with this pipework.

Get something around the pipe, been mentioned a few times on here.

Logged
Pages: [1]   Go Up
« previous next »