Bov or dv? And why

[Nayo]

Which do u prefer are recommend and why?

Videos welcome

Best performing, sounding, value, quality

[GrayMK5GTI]

TFSI is designed to have the boost recirculated to minimise turbo lag. The noise is for Scoobys etc 

People have run "dump valves" but found the engine doesn't run very well. You can get a DV spacer from Forge which gives the noise but has been proven to lose power.

Your best off with the OEM REV "G"  DV   

[vRS Carl]

I ran the forge adjustable Atmospheric valve on my last vRS for a while (around 20k miles) and never had any issue with it. It held boost fine on mine. I only got rid when i relocated the DV.

[Nayo]

TFSI is designed to have the boost recirculated to minimise turbo lag. The noise is for Scoobys etc 

People have run "dump valves" but found the engine doesn't run very well. You can get a DV spacer from Forge which gives the noise but has been proven to lose power.

Your best off with the OEM REV "G"  DV   

Ok thanks for that so would u say to just leave it standard and maybe just upgrade the intake?

[GrayMK5GTI]

TFSI is designed to have the boost recirculated to minimise turbo lag. The noise is for Scoobys etc 

People have run "dump valves" but found the engine doesn't run very well. You can get a DV spacer from Forge which gives the noise but has been proven to lose power.

Your best off with the OEM REV "G"  DV   

Ok thanks for that so would u say to just leave it standard and maybe just upgrade the intake?

Yes! The right intake would make some fantastic noises. Try Evoms 

[Pikey Motorsports]

run a vacuum to the TB pipe from a solenoid if your going to run full atmos and you will have no probs if its noise your after