BSH Catch tank alternative fit.

[SteveP]

^^^ they are listed earlier in the thread John 

they cost about £2 each 

[RedRobin]

you got a p/n for the spring clips Steve?
looks so much more OEM  

....Part No. N 906 869 01 (23x12 Spring Type Clip)

^ According to Steve's earlier post.

[john_o]

cheers my bad for jumping in 1/2 way through a thread ,
£2 

[RedRobin]

£2  

....£2 EACH!? - How many of those oem clips are needed?

[SteveP]

4 clips are needed.

[bacillus]

£2  

....£2 EACH!? - How many of those oem clips are needed?

Well none actually but if you want the oem look you'll need four.  

[candy turbo]

if your tight you could get away with 2 if you have oem engine cover

[RedRobin]

£2  

....£2 EACH!? - How many of those oem clips are needed?

Well none actually but if you want the oem look you'll need four.  

....Well, I wouldn't want anyone to feint from shock and horror when spotting that my clips in my engine bay weren't oem, would I!

Methinks I'll wait and see what the supplied clips look like but one thing is clear: The Khazi Can needs removing from the engine bay to then be emptied and cleaned properly, and so spring clips might just be rather more helpful. So it's not just a cosmetic consideration.

[bacillus]

The supplied clamps are standard jubilee clamps. 

[RedRobin]

The supplied clamps are standard jubilee clamps. 

....Then it's gotta be worth £8 to be able to spring clip off the Khazi Can each time you need.

[QD MBE]

Steve,

can't see the pics, did the clips fit well, with correct tension to prevent leaks?

 

[SteveP]

Steve,

can't see the pics, did the clips fit well, with correct tension to prevent leaks?

 

Yep them seam fine, I have done my normal commute to work (80miles) and there is no leaks 

[candy turbo]

i picked up 2 clips today , thats all they had ! just need the kit now !

[keith]

The supplied clamps are standard jubilee clamps. 

....Then it's gotta be worth £8 to be able to spring clip off the Khazi Can each time you need.

Does the can not unscrew from the head?

[SteveP]

^^^ Not sure what you mean Keith 

To empty the can (when installed in the BSH standard location) you need to remove the two hoses connecting to it then it just pulls out of the bracket.

You can then open the tap on the bottom and drain it off to a suitable container