ITG intake problem

[M7AXB]

Hi all,

Quickly tried to fit my ITG intake last night and ran into a couple of issues.

How do you get the heat sheild to fit? The instructions said about rubber grommets but, i don't seem to have them?

It also seems very tight at the 90 degree bend at the battery, is this normal?

Was missing a jubilee clip too so had to put the old intake back on until the new one arrives 

Cheers

[WHOZBOSS]

From what I've read you use the rubber grommets from under your engine cover.

[Christian1402]

Yeah just use your rubber ones from the oem engine cover mate.

[H17YD_L]

If you have to undo the black plastic engine cover mounts, they have a nut on the underside so they will not undo without removing this first

[M7AXB]

Ah forgot about the rubber grommets attached to the engine cover, cheers

[Markyed30]

If you have to undo the black plastic engine cover mounts, they have a nut on the underside so they will not undo without removing this first

I chewed he'll out of mine till I eventually realised the nuts underneath as the front 2 just screw in 

[H17YD_L]

I found out the same way. I thought no way theses can be this tight lol

[Wooosh]

It also seems very tight at the 90 degree bend at the battery, is this normal?

I thought exactly the same when i fitted mine but everyones seems the same