Make a donation

Author Topic: Engine bay cleaning  (Read 2253 times)

Offline craig_t

  • Always Involved
  • ****
  • Thank You
  • -Given: 9
  • -Receive: 1
  • Posts: 245
  • Craig
    • Email
Engine bay cleaning
« on: August 25, 2013, 09:56:05 pm »
What are the best products to use for cleaning the engine bay.
Admin notice, sig pic removed for being to big.

Offline torque777

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 0
  • -Receive: 12
  • Posts: 554
Re: Re: Engine bay cleaning
« Reply #1 on: August 26, 2013, 07:35:10 am »
I've just done mine ...used autobrite jaffa clean ..agitated with a brush then power washed ...dried with blower then coated with autobrite engine protectant ..oh and don't forget to bag the alternator ..



sent using my own fingers

Offline BlueSmokeyJoe

  • Taking part
  • ***
  • Thank You
  • -Given: 1
  • -Receive: 3
  • Posts: 34
    • Email
Re: Engine bay cleaning
« Reply #2 on: August 26, 2013, 10:27:59 pm »
I've used Meguiars APC to good effect before. As mentioned above, agitated but rinsed off with a small watering can as not to soak everything and most importantly, keep water/moisture from the electrics.

Afterwards, seal with Aerospace 303 sealant and your bay will just wipe clean in the future!  :drinking:

Offline chowgar

  • Always Involved
  • ****
  • Thank You
  • -Given: 23
  • -Receive: 6
  • Posts: 430
Re: Engine bay cleaning
« Reply #3 on: September 04, 2013, 09:37:25 pm »
Can anyone help with what electrics need to be protected... dunno if someone could point out on a pic of the engine bay... gonna do mine soon as I am fitting a twin take and new engine cover... just want to make sure I protect everything that needs doing...

cheers guys

Offline torque777

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 0
  • -Receive: 12
  • Posts: 554
Re: Re: Engine bay cleaning
« Reply #4 on: September 04, 2013, 10:05:58 pm »
I just make sure the alternator is covered in a plastic bag and I don't direct the jet wash lance too close to fusebox or battery etc ...you need some all purpose cleaner too ...

sent using my own fingers

Offline chowgar

  • Always Involved
  • ****
  • Thank You
  • -Given: 23
  • -Receive: 6
  • Posts: 430
Re: Engine bay cleaning
« Reply #5 on: September 04, 2013, 10:31:15 pm »
I have some of the autobright jaffa degreaser... what about where your coils are?

Offline torque777

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 0
  • -Receive: 12
  • Posts: 554
Re: Re: Engine bay cleaning
« Reply #6 on: September 05, 2013, 06:16:11 am »
Maybe just don't direct the lance at them or cover with a bag ? The only place I put the lance directly was the inner wings and tbh the small karchers aren't that powerful

sent using my own fingers