Make a donation

Author Topic: RCD 510 and mk6 climate fitting.  (Read 1250 times)

Offline mk4gti-t

  • Always Involved
  • ****
  • Thank You
  • -Given: 61
  • -Receive: 3
  • Posts: 397
    • Email
RCD 510 and mk6 climate fitting.
« on: September 23, 2013, 05:19:55 pm »
I want to fit an RCD510 and mk6 climate control panel with heated seat buttons to my 2005 gti. What parts other than the 2 units themselves and a new can gateway do i need to do this? Is the climate a straight swap or is there another facia/surround needed? Cheers  :happy2:

Offline MC71

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 413
  • -Receive: 427
  • Posts: 5198
  • Mk7 R
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,113185.0.html
Re: RCD 510 and mk6 climate fitting.
« Reply #1 on: September 23, 2013, 06:31:56 pm »
Yes, there's another facia needed. P/N is 1K0 858 069 M 1QB.
.                              

                    Build thread Stage 2+ Edition 30 ~~Clicky here~~

Offline doylebros

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 44
  • -Receive: 309
  • Posts: 2775
Re: RCD 510 and mk6 climate fitting.
« Reply #2 on: September 23, 2013, 07:27:16 pm »
As far as I'm aware it not success full on every model before late 2007 - then if it is,you've got to do the basic setting to the flaps with VCDS, since the heater panel has been removed.

http://wiki.ross-tech.com/wiki/index.php/VW_Golf_(1K)_Climatic
« Last Edit: September 23, 2013, 07:58:54 pm by doylebros »

Offline mk4gti-t

  • Always Involved
  • ****
  • Thank You
  • -Given: 61
  • -Receive: 3
  • Posts: 397
    • Email
Re: RCD 510 and mk6 climate fitting.
« Reply #3 on: September 23, 2013, 11:03:01 pm »
So that facia will fit my original set up to accommodate the mk6 climate controls? Cheers for the info.