Make a donation
« previous next »
Pages: [1]   Go Down

Author Topic: Turbo problem  (Read 535 times)

Offline M7AXB

  • Always Involved
  • ****
  • Thank You
  • -Given: 24
  • -Receive: 10
  • Posts: 239
Turbo problem
« on: October 07, 2013, 11:23:51 pm »
Hi all!


Just bought a nearly new turbo to fit to my eddy.

It all looks okay except one on the hose connectors is broke as per pic



Would i be able to just swap over the bit easily of my old ko4? Tried to contact seller but, no reply yet as a bit unfair saying in very good condition when I'm going to have to get this fixed now too. Having no luck ATM :sad1:
« Last Edit: October 09, 2013, 12:45:49 am by M7AXB »
Logged

Offline vRSAlex

  • Admin
  • Just look at my post count
  • *
  • Thank You
  • -Given: 39
  • -Receive: 253
  • Posts: 2761
    • Email
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,19941.0.html
Re: Turbo problem
« Reply #1 on: October 07, 2013, 11:33:02 pm »
They are very fragile. One little knock and it breaks. Use the n75 from your old turbo.

So was it something going into the turbo that caused the issue?
Logged
www.akstuning.co.uk - info@akstuning.com - 01234 822324
Follow AKS tuning on Facebook

Offline M7AXB

  • Always Involved
  • ****
  • Thank You
  • -Given: 24
  • -Receive: 10
  • Posts: 239
Re: Turbo problem
« Reply #2 on: October 08, 2013, 09:18:39 am »
Yes mate, you were right :notworthy:. I bought a second hand ITG that was half assembled and just fired it on. When I took it all off to look into it further i found a bolt inside  :scared:

Is it easy to switch over the n75? I'm not wanting charged a fortune in labour by this garage.

Cheers
Logged
Pages: [1]   Go Up
« previous next »