Make a donation
« previous next »
Pages: [1]   Go Down

Author Topic: rethreading plastic  (Read 1317 times)

Offline sootpig

  • Always Involved
  • ****
  • Thank You
  • -Given: 11
  • -Receive: 13
  • Posts: 264
    • Email
rethreading plastic
« on: October 01, 2013, 08:27:13 pm »
Need a couple of plastic holes re threading. will an epoxy filler do the job or is there something better
       Thanks in advance  :drinking:
Logged

Offline simonp

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 10
  • -Receive: 38
  • Posts: 1095
  • No longer a Golfer
Re: rethreading plastic
« Reply #1 on: October 02, 2013, 12:13:06 pm »
Helicoil?
Logged

Offline DDM

  • Always Involved
  • ****
  • Thank You
  • -Given: 1
  • -Receive: 9
  • Posts: 222
    • Email
Re: rethreading plastic
« Reply #2 on: October 02, 2013, 06:26:56 pm »
you could try warming the bolt/screw you intend to use on the piece of plastic, ie warm it up and wind it in and leave to cool,
Logged

Offline vRSAlex

  • Admin
  • Just look at my post count
  • *
  • Thank You
  • -Given: 39
  • -Receive: 253
  • Posts: 2761
    • Email
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,19941.0.html
Re: rethreading plastic
« Reply #3 on: October 02, 2013, 06:34:24 pm »
Easiest and quickest way is to fire epoxy into the hole and screw the screw into it. Once it sets you should be able to wind it tighter against the part you are holding in.

Pcv valve by any chance?
Logged
www.akstuning.co.uk - info@akstuning.com - 01234 822324
Follow AKS tuning on Facebook

Offline sootpig

  • Always Involved
  • ****
  • Thank You
  • -Given: 11
  • -Receive: 13
  • Posts: 264
    • Email
Re: rethreading plastic
« Reply #4 on: October 02, 2013, 06:47:33 pm »
Quote from: vRSAlex on October 02, 2013, 06:34:24 pm
Easiest and quickest way is to fire epoxy into the hole and screw the screw into it. Once it sets you should be able to wind it tighter against the part you are holding in.

Pcv valve by any chance?
This worked with PTFE tape wrapped around the threads  Thanks for the replies  :happy2:
Logged
Pages: [1]   Go Up
« previous next »