Make a donation

Author Topic: Wheel fitment picture request.  (Read 2943 times)

Offline Veee-dubber

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 13
  • -Receive: 7
  • Posts: 674
    • Email
Wheel fitment picture request.
« on: October 21, 2013, 11:47:40 am »
Firstly, yes I know there is a wheel thread.

As many of you may know I recently purchased some new wheels only to find out they do not fit...  :sad1:

I've found some new wheels that I'm pretty sure fit but wanted to make sure I get it right this time, so I was wondering if anyone could A) confirm this and B) Post a pic of wheels in the same size & fitment so I can see what they will sit like if anyone has one?

They are Lenso SLR (Limited Edition Alphard Reps)
5x112
18 x 8.5 J
ET 45
CB 73.1

Will they sit pretty?  :pomppomp:


 :drinking:

Offline JoeDarKa

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 57
  • -Receive: 73
  • Posts: 3188
Re: Wheel fitment picture request.
« Reply #1 on: October 21, 2013, 02:01:13 pm »
They will easily fit


GT Sport - Reflex Silver 2.0 TDI My Build

Offline ROH ECHT

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 113
  • -Receive: 147
  • Posts: 2116
  • K04 PLAY....ZOOM DIS!
Re: Wheel fitment picture request.
« Reply #2 on: October 21, 2013, 04:14:07 pm »
Firstly, yes I know there is a wheel thread.

As many of you may know I recently purchased some new wheels only to find out they do not fit...  :sad1:

I've found some new wheels that I'm pretty sure fit but wanted to make sure I get it right this time, so I was wondering if anyone could A) confirm this and B) Post a pic of wheels in the same size & fitment so I can see what they will sit like if anyone has one?

They are Lenso SLR (Limited Edition Alphard Reps)
5x112
18 x 8.5 J
ET 45
CB 73.1

Will they sit pretty?  :pomppomp:


 :drinking:
It will depend on the ride height...I have 18x8-45 ETwith 225/40-18's on them. Any wider would rub my dub badly at my height. If you stretch the tires(<US spelling)...then maybe. If running H&R supersports or Eibach sportlines you are OK as well. I cannot fit my fingers between the arch and the rubber in front, and can barely squueze them in between the rear arch and rubber.





« Last Edit: October 21, 2013, 04:16:31 pm by ROH ECHT »
K04 PLAY...K04 turbo/S3 INJ. & FMIC/FORGE FMTC, TB hose, & WG actuator/GIAC's H.O. K04 & DSG TUNES/AWE DV/NEUSPEED P-FLO,TURBO OUTLET & TB pipe/AUTOTECH hpfp/BSH Eng.&Trans Mounts/H&R ARB's/Whiteline Performance springs & W.A.L.K./ECS stage-3 BBK/BILSTEIN B8's...ZOOM'DIS...GIAC K04 tune-2007 Volkswagen GTI: 12.823 @ 112.050 MPH__Voting for my Dragtimes link: http://www.dragtimes.com/Volkswagen-GTI-Timeslip-25700.html?r=1

Offline xjay1337

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 15
  • -Receive: 377
  • Posts: 4916
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,88399.0.html
Re: Wheel fitment picture request.
« Reply #3 on: October 21, 2013, 04:44:36 pm »
I have 18x8.5 et44 with 215/35 tyres.

Et 45 on the same width will sit 1mm further back in the arch (so basically the same as me.)

You can see it here




You will need 205/40 tyres or 215/35s if you are going to be rolling very low. You can probably put 215/40s on if you really want to.



« Last Edit: October 21, 2013, 04:47:12 pm by xjay1337 »

Offline RedED30

  • Always Involved
  • ****
  • Thank You
  • -Given: 19
  • -Receive: 3
  • Posts: 176
Re: Wheel fitment picture request.
« Reply #4 on: October 21, 2013, 05:33:27 pm »
If you want to go real low, you will need a 35 offset, i run 225/35/19 on ET 35's and i get no scrub.

If you check my build thread you will see the difference as mine goes from 2 sets of eT45 to eT35.
Revo Stage2 - With Linear Throttle
Revo DSG
BCS Turboback Powervalve - This is a must.
ITG Closed Intake.. wooosh

Here to enjoy and help, with a hint of sarcasm, please do not be offended

Offline Homer

  • Always Involved
  • ****
  • Thank You
  • -Given: 12
  • -Receive: 4
  • Posts: 393
Re: Wheel fitment picture request.
« Reply #5 on: October 21, 2013, 06:10:26 pm »
How do such big wheels affect the handling?

Offline Veee-dubber

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 13
  • -Receive: 7
  • Posts: 674
    • Email
Re: Wheel fitment picture request.
« Reply #6 on: October 21, 2013, 06:28:56 pm »
Thanks guys! They seem to fit the arches welll!

Havent purchased the lows yet purposely so I can suit them to the wheels which I hadnt found until today  :drool: Any recomendations on ones to suit?

All coming together now, xenon's, skirts, front and rear bumper +++ all sat in my spare room patiently waiting to be joined by alloys & lows & then BOOM - D DAY!

Can you tell I'm excited?

Offline xjay1337

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 15
  • -Receive: 377
  • Posts: 4916
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,88399.0.html
Re: Wheel fitment picture request.
« Reply #7 on: October 21, 2013, 08:05:27 pm »
If you want to go real low, you will need a 35 offset, i run 225/35/19 on ET 35's and i get no scrub.

If you check my build thread you will see the difference as mine goes from 2 sets of eT45 to eT35.

Then you're not real low  :grin:

On an 8.5 with et35 you will rub on the wheel arch quite easily.

Offline Veee-dubber

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 13
  • -Receive: 7
  • Posts: 674
    • Email
Re: Wheel fitment picture request.
« Reply #8 on: October 21, 2013, 08:10:17 pm »
Xjay what lows set up are you running cos your car is sitting very nicely indeeeed!

Offline JoeDarKa

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 57
  • -Receive: 73
  • Posts: 3188
Re: Wheel fitment picture request.
« Reply #9 on: October 21, 2013, 08:15:52 pm »
Xjay what lows set up are you running cos your car is sitting very nicely indeeeed!

Air  :grin:


GT Sport - Reflex Silver 2.0 TDI My Build