New APR K04 Stage 2+ file

[mvb12]

My stage 2+ k03 was below APRs quoted figures on two different dynos but it drove well so it wasn't a problem for me.

what figures did you get if you don't mind?

[john a]

270 bhp and 300 lb ft at stage 2+
Went well enough though.

[Sug]

I have just had the new APR stage 2+ file loaded on my R
Evoms intake
Loba Motorsport hpfp
BCS downpipe and race cat
Will be getting it dyno'd next week for results
Don't think it will make the 360-70bhp that apr quote would be happy with 340 though as it goes well

[TommyR]

I have just had the new APR stage 2+ file loaded on my R
Evoms intake
Loba Motorsport hpfp
BCS downpipe and race cat
Will be getting it dyno'd next week for results
Don't think it will make the 360-70bhp that apr quote would be happy with 340 though as it goes well

Which rollers are you going on? I would be interested to see the results as I'm still torn between APR & another big brand...

[Sug]

A local tuner in Durham mate (2wd dyno)

[TommyR]

A local tuner in Durham mate (2wd dyno)

Ah I see I was hoping it would be on a well known one like JKM or R-tech but it will still be interesting regardless… Especially as my friends S3 did 343bhp 363lb/ft with the v3.4 2+ map on a local rolling road but I’m unsure how accurate it is.

[Sug]

Every dyno is different even the well know ones so it's a bit if a lottery tbh. She goes well I know that getting a lower mount fitted so might as well put it on the rollers

[TommyR]

Every dyno is different even the well know ones so it's a bit if a lottery tbh. She goes well I know that getting a lower mount fitted so might as well put it on the rollers

True and that's what counts

[duncatr]

I have just had the new APR stage 2+ file loaded on my R
Evoms intake
Loba Motorsport hpfp
BCS downpipe and race cat
Will be getting it dyno'd next week for results
Don't think it will make the 360-70bhp that apr quote would be happy with 340 though as it goes well

What did it make in the end?

My Cupra R (same base) recently made 360BHP on stage 1+ where it was mapped. Had it on a different RR to check and it made 6bhp less.
APR HPFP, Evoms intake. (still not fitted the sports cat downpipe)
Only difference between the 2 days was 4degrees temp change and I fitted red coils and new plugs, plus I had to fit a Sachs uprated clutch and new DMF (manual box) :(

Now considering fitting the down pipe and going for stage 2+ software upgrade.

[Sug]

Bit disappointed by the RR results (2wd RR )
310hp and 400nm


Any idea?

[rich83]

Stage 2+

[Sug]

Yes mate sorry.
Evoms
Loba
Bcs downpipe and sports cat
Apr stage 2+ software

[rich83]

Do some on road logging.

[Tfsi_Mike]

Mine made 345 on Marlin motors Dyno (MAHA iirc) and 346 on APRs Dyno.  Before v3.4 and before RFD so hopefully see some gains afterwards

[rich83]

Take it out and log the boost, fuel rail pressure, N75... as much as you can.