Make a donation

Author Topic: Snow foam lance problem - need your help  (Read 1779 times)

Offline brookesb32

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 59
  • -Receive: 75
  • Posts: 1068
Snow foam lance problem - need your help
« on: November 09, 2013, 09:25:35 pm »
Hi all

I have been using my lance for nearly a year with no issues unit a couple of months back when the foam started coming  out of the side holes in the black section and isn't as thick (if you take it off it is Coming from the 4 holes in the metal).

I have tried cleaning and descaling the lance in case it was blocked but apart from being very clean the problem still persists

Has anyone had anything similar and been able to rectify it?

Pic below is just with water going through as missed taking a pic when had the foam in the bottle so put water in for the pic



VCDS cable HEX-USB+CAN. New but can do the basics including coding


Offline rich83

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 165
  • -Receive: 802
  • Posts: 13444
    • MK5 Golf GTI
  • My Ride: https://www.mk5golfgti.co.uk/forum/index.php?PHPSESSID=epqrnaqe13c6u3agmnmcpa3srr&/topic,19740.0.html
Re: Snow foam lance problem - need your help
« Reply #1 on: November 09, 2013, 10:09:45 pm »

Offline brookesb32

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 59
  • -Receive: 75
  • Posts: 1068
Re: Snow foam lance problem - need your help
« Reply #2 on: November 09, 2013, 10:11:45 pm »
Take a look at this guide to servicing it.

http://www.detailingworld.co.uk/forum/showthread.php?t=84349&highlight=snowfoam

Thanks mate, had seen that but hoped I didnt have to do it  :grin:
VCDS cable HEX-USB+CAN. New but can do the basics including coding


Offline brookesb32

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 59
  • -Receive: 75
  • Posts: 1068
Re: Snow foam lance problem - need your help
« Reply #3 on: November 13, 2013, 08:57:39 pm »
Any other thoughts guys before I take it apart?
VCDS cable HEX-USB+CAN. New but can do the basics including coding