Make a donation

Author Topic: Edition 30 Chassis Set Up  (Read 3529 times)

Offline rob_e

  • Always Involved
  • ****
  • Thank You
  • -Given: 12
  • -Receive: 7
  • Posts: 278
  • 2012 vRS Octavia
    • vRS blog on Pistonheads
    • Email
Re: Edition 30 Chassis Set Up
« Reply #15 on: November 14, 2013, 02:20:28 pm »
I've had a mk5 gti, a vRS and another vRS - all with various chassis mods.

I've run: eibach, koni, weitec, bilstein and h&r.

The setup I have on my current car is by far the best for my needs.  I don't do track days but i drive the car pretty hard but it also has to be comfy enough for family duties.

My setup: s3 wishbones, superpro camber adjustable ball joints (allows some neg camber on the front) autotech hollow rear bar, light wheels, light brakes, h&r monotubes, goodyear assymetric2s.

The car rides as good if not better than stock and handles very nicely - a masive improvement over stock imo.

 :driver:



2012 TSI vRS: H&R monotubes, S3 arms, H&R rARB, Neuspeed RSe07, Brembos, MFSW and a few other tweaks..  PH Blog:  http://www.pistonheads.com/members/showcar.asp?carId=191311

Offline Hootz

  • Always Involved
  • ****
  • Thank You
  • -Given: 0
  • -Receive: 0
  • Posts: 50
    • Email
Re: Edition 30 Chassis Set Up
« Reply #16 on: November 20, 2013, 08:44:06 pm »
Ok, so I've decided to get a RARB and the anit-lift kit, either WALK or the super pro alternative.

Should I buy the Whiteline RARB or hop on the H&R Group buy?

WALK or SALK?

Thanks

Offline MC71

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 413
  • -Receive: 427
  • Posts: 5198
  • Mk7 R
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,113185.0.html
Re: Edition 30 Chassis Set Up
« Reply #17 on: November 20, 2013, 09:15:08 pm »
H&R ARB and SALK. IIRC there have been a few cases of the poly bush failing on the WALK.
.                              

                    Build thread Stage 2+ Edition 30 ~~Clicky here~~