Make a donation

Author Topic: Urgent help Canbus gateway change, wipers not working anymore  (Read 1072 times)

Offline NezEd30

  • Taking part
  • ***
  • Thank You
  • -Given: 1
  • -Receive: 0
  • Posts: 30
Urgent help Canbus gateway change, wipers not working anymore
« on: November 24, 2013, 12:21:33 pm »
Help please, I got a new gateway precoded I installed it and my front wipers aren't working now, I took the motor out to get to the gateway and after I've put it back in it worked once and then stopped working, any help would be appreciated :smiley:

Offline Scottymon

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 83
  • -Receive: 125
  • Posts: 2139
  • UnNaturally Aspirated
  • My Ride: http://www.voodish.co.uk/misc/6n/6n-alive1.jpg
Re: Urgent help Canbus gateway change, wipers not working anymore
« Reply #1 on: November 24, 2013, 12:30:06 pm »
Might be that the motor was on the way out and since disturbing it...  you can pick them up quite cheap on ebay if all else fails.

Offline NezEd30

  • Taking part
  • ***
  • Thank You
  • -Given: 1
  • -Receive: 0
  • Posts: 30
Re: Urgent help Canbus gateway change, wipers not working anymore
« Reply #2 on: November 24, 2013, 02:31:29 pm »
Seems to be working again for now, I'll be keeping my eyes on it though, cheers!

Offline mk4gti-t

  • Always Involved
  • ****
  • Thank You
  • -Given: 61
  • -Receive: 3
  • Posts: 397
    • Email
Re: Urgent help Canbus gateway change, wipers not working anymore
« Reply #3 on: November 26, 2013, 03:30:38 pm »
Why did you need to remove the motor? Where is your can bus located? Mine seems to be behind the dash near the steering column and can be accessed by lying on my back lol

Offline Degudodger

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 53
  • -Receive: 86
  • Posts: 1547
    • Flickr
Re: Urgent help Canbus gateway change, wipers not working anymore
« Reply #4 on: November 29, 2013, 09:40:22 pm »
Some (post 2006) are located behind the coin tray under the headlight switch and can either be accessed by removing the scuttle panel and wiper motor linkage, or by removing the coin tray and ferreting around. I prefer the later, it's quicker and less hassle but it takes a week for the skin on my hands to grow back :)
2016 Mk7 Golf GTD - Reflex Silver with stuff.

VCDS Hex+Can - Will code for beer!