Author Topic: DIY antenna mod: rcd300 to rcd310 (Read 1136 times)

Alex156 · « **on:** November 30, 2013, 10:04:03 pm »

Hi,

Have just purchased an rcd310 to replace the rcd300 in my 2007 mk5 GTI. I know an antenna adapter is required and I have ordered one but unfortunately it hasn't arrived in time and the time I have to fit everything is tomorrow. Does anyone have a DIY for how to do this with parts of the shop from a shop that would be open on a Sunday. At the minute I'm thinking speaker wire and an assortment of connectors plus insulating tape to hold in place.

Any suggestions appreciated?

Thanks!

apples12 · « **Reply #1 on:** November 30, 2013, 11:51:24 pm »

if you just take the outer housing off the connectors they will pop on, bit of tape to keep them secure may suffice...

Alex156 · « **Reply #2 on:** December 03, 2013, 12:22:40 am »

Worked a treat, thank you!

Adil · « **Reply #3 on:** December 06, 2013, 05:20:07 pm »

Just taped them?

eBay do the connectors for around a fiver.

Author Topic: DIY antenna mod: rcd300 to rcd310 (Read 1136 times)

Alex156

DIY antenna mod: rcd300 to rcd310

apples12

Re: DIY antenna mod: rcd300 to rcd310

Alex156

Re: DIY antenna mod: rcd300 to rcd310

Adil

Re: DIY antenna mod: rcd300 to rcd310