Make a donation

Author Topic: Boot 12v socket not working  (Read 2627 times)

Offline jakex181

  • Always Involved
  • ****
  • Thank You
  • -Given: 4
  • -Receive: 2
  • Posts: 202
Boot 12v socket not working
« on: December 02, 2013, 08:57:32 am »
I have a problem with my 2006 mk5 golf gti, the 12v out socket in the boot is not working but the one in the front works fine, any ideas? I have looked at what i believe to be the correct fuses but they both appear to be fine.


Offline doylebros

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 44
  • -Receive: 309
  • Posts: 2774
Re: Boot 12v socket not working
« Reply #1 on: December 02, 2013, 06:21:23 pm »
The Boot 12 volt socket is known as U5 and is on a different circuit to the front or rear cab cig lighter.

It should be on fuse SC 26  - 20amp fuse.

Send me a PM if you need a circuit diagram and fuse holder break down.

Offline jakex181

  • Always Involved
  • ****
  • Thank You
  • -Given: 4
  • -Receive: 2
  • Posts: 202
Re: Boot 12v socket not working
« Reply #2 on: December 02, 2013, 08:44:31 pm »
Ive checked the fuse and its fine, atleast I think it was the correct one but I checked them all to be sure :/

Offline doylebros

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 44
  • -Receive: 309
  • Posts: 2774
Re: Boot 12v socket not working
« Reply #3 on: December 02, 2013, 09:12:25 pm »
On this drawing it's fuse 14 on fuse holder C

http://www.golfgtiforum.co.uk/index.php?topic=200792.0

Best to check the fuses with test light not just a visual inspection!
« Last Edit: December 02, 2013, 09:14:56 pm by doylebros »

Offline jakex181

  • Always Involved
  • ****
  • Thank You
  • -Given: 4
  • -Receive: 2
  • Posts: 202
Re: Boot 12v socket not working
« Reply #4 on: December 03, 2013, 08:01:05 am »
I checked them with a multimeter on the continuity setting, could it be a dodgy wire or something?

Offline doylebros

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 44
  • -Receive: 309
  • Posts: 2774
Re: Boot 12v socket not working
« Reply #5 on: December 03, 2013, 05:52:43 pm »
It's going to be one of those jobs where you need to dismantle bits to check what's going on.

My next move would be to see if someone has disconnected it and used the supply for something else (like boot amp).

If it's not disconnected  - Then make a note of the of the wiring and check the supply to the connections both feed and earth!

Offline doylebros

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 44
  • -Receive: 309
  • Posts: 2774
Re: Boot 12v socket not working
« Reply #6 on: December 03, 2013, 05:57:57 pm »

Offline jakex181

  • Always Involved
  • ****
  • Thank You
  • -Given: 4
  • -Receive: 2
  • Posts: 202
Re: Boot 12v socket not working
« Reply #7 on: December 03, 2013, 07:12:13 pm »
Ive checked all of the fuses and the cigarette lighter in the front works fine so im going to remove the boot 12v out and check the wires.