Make a donation
« previous next »
Pages: [1]   Go Down

Author Topic: Kenwood DnX520bvt poor radio signal was fine with rcd300 what could it be  (Read 1487 times)

Offline gjseb16

  • Always Involved
  • ****
  • Thank You
  • -Given: 3
  • -Receive: 8
  • Posts: 359
    • Email
Kenwood DnX520bvt poor radio signal was fine with rcd300 what could it be
« on: December 12, 2013, 10:47:20 pm »
As above guys any ideas radio reception is rubbish now fitted new Kenwood any ideas
Logged

Offline skard

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 5
  • -Receive: 245
  • Posts: 2674
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,62636
Re: Kenwood DnX520bvt poor radio signal was fine with rcd300 what could it be
« Reply #1 on: December 12, 2013, 11:00:18 pm »
You likely need a powered amplifier, they are under a tenner on ebay. Forgot the part number but if you search on ebay you'll see some variants.
Logged
Used to have Edition 30 - number 009 and a GT TDI 140.
Now have an S4 B8 Avant (stage 2)

Offline f1fan

  • Always Involved
  • ****
  • Thank You
  • -Given: 13
  • -Receive: 3
  • Posts: 205
Re: Kenwood DnX520bvt poor radio signal was fine with rcd300 what could it be
« Reply #2 on: December 13, 2013, 02:21:19 pm »
You either need

http://www.roadradio.com/wiring-fascia-adaptors/PC5-136/5973/

or

http://www.roadradio.com/wiring-fascia-adaptors/CT27AA25/5975/

depending on whether your existing aerial connection is a single or twin fakra.  Connect the blue with to a 12v+ power source and the aerial amplifier will have power and you'll get a decent signal.
Logged
Black 2008 GTi, InPro smoked door mirror indicators, genuine Autohaus Wolfsburg plate holders, uk legal pressed metal plates, LED number plate lights, MTEC super white headlights & side lights, LED internal lights, Polo stubby aerial, Kenwood DDX4023BT head unit & Enfig surround.

Offline J12spk

  • Always Involved
  • ****
  • Thank You
  • -Given: 16
  • -Receive: 22
  • Posts: 484
  • VW PERVERT
    • Email
Re: Kenwood DnX520bvt poor radio signal was fine with rcd300 what could it be
« Reply #3 on: December 13, 2013, 03:39:15 pm »
Keen to know if either of these work?
Logged


Das Auto

Offline w33gry

  • Can't Read PM's Yet!
  • *
  • Thank You
  • -Given: 3
  • -Receive: 0
  • Posts: 9
    • Email
Re: Kenwood DnX520bvt poor radio signal was fine with rcd300 what could it be
« Reply #4 on: March 21, 2014, 02:48:39 pm »
There was two options. A plug on back of stereo has two inputs looks like it didn't match harness but there is one plug from original harness that goes into it so get the reception hope this helps I'll try get a pick of mine
Logged

Offline gjseb16

  • Always Involved
  • ****
  • Thank You
  • -Given: 3
  • -Receive: 8
  • Posts: 359
    • Email
Re: Kenwood DnX520bvt poor radio signal was fine with rcd300 what could it be
« Reply #5 on: March 21, 2014, 03:11:03 pm »
Tried both adaptors above no improvement at all could do with pick mate if you can
Logged
Pages: [1]   Go Up
« previous next »