General > Product Reviews
Clay Cloth
cuprajake:
as in?
a machine rotating at 1200rpm, with compound on a cutting pad vs a glorified piece of blue-tac and a guy and his arm,
??? i know which id choose, clays something aimed at the weekend warrior, then they get hyped up and the bs means you can add another £50 onto a 'detail'
petesimcock:
I mean a panel machine polished in the same way but one half clayed and the other half not
xjay1337:
You should decontaminate the paint before polishing to ensure theres nothing that could either damage the pad, effecting the cutting action, or damage the paint by grinding between the pad and the paint, or cause the pad to stick on a section.
I can see jakes side of it.but wouldn't personally agree. Whatever works for him.
Ps ultrafina is the bollox
cuprajake:
Ultrafina seems to be quite full of fillers.
Just an add on from the original range. They used to have a finishing glaze/machine polish.
My point is clay has only been around for a short while,
I'm machining mine this weekend, today I had the car on the ramp after a good g101 decreasing wash, on the ramp I've cleaned the panels with atomized tardis, the panels, door shuts and under sills are now free from any debris, in left with a virgin paint surface to work on.
Mandy:
--- Quote from: wilmott1980 on March 20, 2014, 01:05:53 pm ---
--- Quote from: Mandy on March 19, 2014, 12:00:51 pm ---I have sold a few of these now and the feedback has all been good so far, I think these clay cloths could get popular...
--- End quote ---
Will there be a sale thread for these at all Mandy?? :wink:
--- End quote ---
I'll pm you Lee...
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version