Cost of Colour Coding Lower Bumper

[irish_ram]

Well new Bumper finally here and pic below.

Gonna fit in  a bit as there is blue skies I can see and will post up before and after photos

[Simon_2.0t]

Well new Bumper finally here and pic below.

Gonna fit in  a bit as there is blue skies I can see and will post up before and after photos

Nice bumper   

[irish_ram]

Well new Bumper finally here and pic below.

Gonna fit in  a bit as there is blue skies I can see and will post up before and after photos

Nice bumper   

I knew you would say that 

Will probably take me less time to fit it as opposed to unwrapping it as I think you may have an OCD for wrapping but did make sure there as no damage on delivery 

[Simon_2.0t]

Ha ha 

Didn't want it scratched. Look forward to pics mate.

Si

[irish_ram]

Ha ha 

Didn't want it scratched. Look forward to pics mate.

Si

Will be good but seem to have hit issues but likely my limited skills.

I have undone all three torx screws in th arches on either side and also removed the lights fine. Also removed the 2 torx screws underneath near each wheels where it had some of the inner arch attached.

I am however hitting problems with the ones in the pics below as in the 2 screws in the arches I cannot see what torx or type they are and when get a torx slotted in it just seems to mangle the screw so help here please.

Also the 2 underneath in the pics, can get to them fine but they turn slowly with massive amount of pressure on them and do not seem to be getting loose so am I doing something wrong here

[irish_ram]

Anyone on this

Currently got the lights removed and most of the bumper screws out but will have to put back if don't sort soon as it will be getting dark 

[Joshy]

I wonder if these guys do r32 rears :D

[ardirom]

I know location doesn't help you out, but I managed to get the lower section of my GT rear bumper done in dundee for £80 and they did a great job.
Obviously worth shopping around and asking via local word of mouth...