Fitting Polar FIS +

[bacillus]

In addition to the question of if you have a highline mfd, is your polar box plastic or aluminium? If aluminium is it silver or black?

[scopes]

Yeah have the high line display, do i need anything else...?  

Didn't fancy having to take it out again  

Left it in a place i could access the box, just encase it could be updated, when connected !  

[bacillus]

Left it in a place i could access the box, just encase it could be updated, when connected !  

If connected then you need to update using the polar update in the configuration setting on the mfd screen.
If you can manage to disconnect the plug from the box then that puts it in update mode and can then be updated by just connecting your usb cable after getting on to the polar update site.

NB The site only works with Internet explorer

[scopes]

In addition to the question of if you have a highline mfd, is your polar box plastic or aluminium? If aluminium is it silver or black?

aluminium it is silver matey... uploading pictures now ......

[scopes]

 

[Andy]

i know when i have had a flat battery on my car mine doesn't work -so i disconnected the battery again leave it a fewminutes and it comes back on

[bacillus]

Ok, if you get to the update site for the update you want to upgrade to FIS_Adv_v0.4.2RZ1(Red_dot)(EN_ES_FR_IT_PT). The updater will also show you if you have a PF03 (advanced) or not by the updates it offers you.

[scopes]

Left it in a place i could access the box, just encase it could be updated, when connected !  

If connected then you need to update using the polar update in the configuration setting on the mfd screen.
If you can manage to disconnect the plug from the box then that puts it in update mode and can then be updated by just connecting your usb cable after getting on to the polar update site.

NB The site only works with Internet explorer

  Cheers matey!

"update in the configuration setting on the mfd screen" I would need to be able to access this first on my dash, would that be right...?  

If so then it needs removed  

It's not doing any harm like this?

[scopes]

i know when i have had a flat battery on my car mine doesn't work -so i disconnected the battery again leave it a fewminutes and it comes back on

I could maybe try that now, say disconnect it for 10 mins?
.... just don't fancy pulling the polar out tonight...

[scopes]

Ok, if you get to the update site for the update you want to upgrade to FIS_Adv_v0.4.2RZ1(Red_dot)(EN_ES_FR_IT_PT). The updater will also show you if you have a PF03 (advanced) or not by the updates it offers you.

  Cheers B:

http://www.auto-polar.com/index-load-Polar_Fis.htm

 

But i still need to take it out of the car to do this 

[bacillus]

The box supports updating both in and out of the car.

If you call it a night and leave the polar disconnected from the car then it's possible that your battery may go flat tomorrow as the head unit may not fully turn off.

update in the configuration setting on the mfd screen" I would need to be able to access this first on my dash, would that be right...?

Correct.

[scopes]

The box supports updating both in and out of the car.

If you call it a night and leave the polar disconnected from the car then it's possible that your battery may go flat tomorrow as the head unit may not fully turn off.

update in the configuration setting on the mfd screen" I would need to be able to access this first on my dash, would that be right...?

Correct.

I will battle on    With your guy's support, we will get something sorted... Battery disconnected for now, until i find a lead!

[scopes]

Battery being disconnected did not seem to work 

So it needs removed to do the update, as i will not see it on the high line screen?

[bacillus]

Battery being disconnected did not seem to work 

So it needs removed to do the update, as i will not see it on the high line screen?

Good luck with the update.

My gut feeling is that there is an issue with the polar cable itself as it's easy to break a wire at either end and not notice it without a close inspection.

[scopes]

Battery being disconnected did not seem to work 

So it needs removed to do the update, as i will not see it on the high line screen?

Good luck with the update.

My gut feeling is that there is an issue with the polar cable itself as it's easy to break a wire at either end and not notice it without a close inspection.

Cheer matey !

I have the box out, so when I go to the update page, it waits till I connect the lead to the polar, then goes to update/connect and shows up with problem!