Make a donation

Author Topic: Making a gen 2 Haldex system work in my golf  (Read 1815 times)

Offline mk_boy85

  • Always Involved
  • ****
  • Thank You
  • -Given: 0
  • -Receive: 3
  • Posts: 360
    • Email
Making a gen 2 Haldex system work in my golf
« on: February 16, 2014, 10:19:06 pm »
Hi I'm really struggling to source parts to make a gen 2 system work without the oe wiring or I have diagrams and have the relevant hardware installed and require someone to wire it. Can anyone help with either solution !!!


Sent from my iPhone using Tapatalk

Offline SI-R32

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 8
  • -Receive: 125
  • Posts: 1001
Re:
« Reply #1 on: February 16, 2014, 11:05:28 pm »
A location might help for anyone wanting to volunteer?
Loads of extra's and retro fits.

Offline vRSAlex

  • Admin
  • Just look at my post count
  • *
  • Thank You
  • -Given: 39
  • -Receive: 253
  • Posts: 2761
    • Email
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,19941.0.html
Re: Making a gen 2 Haldex system work in my golf
« Reply #2 on: February 16, 2014, 11:21:45 pm »
Iirc it's only 5 wires. I have diagrams and I can get plugs and wires.
www.akstuning.co.uk - info@akstuning.com - 01234 822324
Follow AKS tuning on Facebook

Offline mk_boy85

  • Always Involved
  • ****
  • Thank You
  • -Given: 0
  • -Receive: 3
  • Posts: 360
    • Email
Re: Making a gen 2 Haldex system work in my golf
« Reply #3 on: February 17, 2014, 05:46:27 am »
A location might help for anyone wanting to volunteer?

Hi I'm in Swadlincote/Derbyshire. I'd quite happily bring the car to someone or they could travel to me and I'd pay for accommodation etc if it's a fair way, just want it done now


Sent from my iPhone using Tapatalk

Offline mk_boy85

  • Always Involved
  • ****
  • Thank You
  • -Given: 0
  • -Receive: 3
  • Posts: 360
    • Email
Re: Making a gen 2 Haldex system work in my golf
« Reply #4 on: February 17, 2014, 05:49:06 am »
Iirc it's only 5 wires. I have diagrams and I can get plugs and wires.

Thanks it would be nice to look at the wiring and get the plugs. I have a small loom with two plugs from the controller. I'm just not that confident with it and I'll need someone to code it in via vag com of which I don't have easy access too nor understand.




Sent from my iPhone using Tapatalk