Make a donation

Author Topic: Intake manifold motor, Help!  (Read 3386 times)

Offline Dynamik

  • Just Arrived
  • **
  • Thank You
  • -Given: 0
  • -Receive: 0
  • Posts: 12
    • Email
Intake manifold motor, Help!
« on: March 08, 2014, 12:53:00 am »
Hi all

I know it sounds pretty stupid but hope you guys can give me some advice.
So my gti's just been in for a pre-inspection at the local VW service centre after getting my freshly imported MKV Gti about 2 weeks ago from a dealer.. (i know i should've done it BEFORE I bought the car...just been too busy with work damnit.)

The result shows
'Intake manifold flap motor faulty - needs replacing.'
'Lower control arm bushes worn'
'rear tail light dim'.


What worries me is the intake manifold motor.
Did anyone have to replace it?
The guy at VW centre quotes me the part itself will cost about $1k which sounds a bit ridiculous to me.
Sounds like i'm getting ripped off..

I live in New Zealand, so the cost of the part might be different so i'll do the maths if you give me the figures haha

anyways, if there are anyone from NZ here it would be great to discuss how to go about it.

Cheers guys


Eric


Offline Hurdy

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 52
  • -Receive: 137
  • Posts: 7683
Re: Intake manifold motor, Help!
« Reply #1 on: March 08, 2014, 01:23:28 am »
Have you tried a reset in VCDS? If not you can do a reset for the unit and watch the angle change as it does so! If it doesn't reset or alter then the fault is permanent in some way. Check the wiring between the manifold flap motor unit and the ECU. A few have been known to show this fault and for it to be the wire. If this checks out ok then it is likely to be the unit. :happy2:
Golf R gone.

Offline Dynamik

  • Just Arrived
  • **
  • Thank You
  • -Given: 0
  • -Receive: 0
  • Posts: 12
    • Email
Re: Intake manifold motor, Help!
« Reply #2 on: March 08, 2014, 02:58:53 am »
Thanks for the advice Hurdy! I will tell the mechanic to try that. Should've asked the mechanic if he'd done it just to rectify the defect. I guess that's the logical steps haha I'm very new to VWs and cars with electronic gadgets so i have lots to learn!


Sent from my iPhone using Tapatalk

Offline bigmig95

  • Always Involved
  • ****
  • Thank You
  • -Given: 39
  • -Receive: 50
  • Posts: 467
  • I know enough to know that I don't know enough.
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,53191.0.html
Re: Intake manifold motor, Help!
« Reply #3 on: March 08, 2014, 08:27:36 am »
If it helps ? the dealer price to replace the motor here in the UK is £195 including VAT and it's around 1 hours labour. 


Sent from my iPhone using Tapatalk

Offline bacillus

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 4
  • -Receive: 451
  • Posts: 6330
Without traction power is nothing!

Offline doylebros

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 44
  • -Receive: 309
  • Posts: 2775
Re: Intake manifold motor, Help!
« Reply #5 on: March 08, 2014, 07:56:51 pm »
If your engine is the AXX  engine then part number 06F 133 482 - £ 197.74

If your engine is the BWA,BPY OR BYD  engine then part number 06F 133 482 E - £ 197.74

Both UK prices inc vat

This may help item 8

http://www.partscats.info/volkswagen/en/?i=cat_vag_models&brand=vw&number=1714&set=1728&ein=2007&f=474&hauptgr=1234567890&hg=1&grf=013335460&bf=13335&hgug=133&ug=33&parent_id=2339334

One here for sale who does international shipping

http://www.ebay.com/itm/06f-133-482-E-VW-AUDII-INTAKE-FLAP-MOTOR-BRAND-NEW-/161214954730?pt=Motors_Car_Truck_Parts_Accessories&hash=item258928fcea&vxp=mtr

Offline Dynamik

  • Just Arrived
  • **
  • Thank You
  • -Given: 0
  • -Receive: 0
  • Posts: 12
    • Email
Re: Intake manifold motor, Help!
« Reply #6 on: March 08, 2014, 09:08:36 pm »
Thanks for the comments! seems like it was overpriced. yea my engine is AXX and I hear some things about AXX engine like it's not as strong as BWA, BPY and such? i mean performance tuning wise. worries me a bit..
In the meanwhile I will have to order some parts just in case they decide to fail at some stage. Always good to have parts in stock! haha


Sent from my iPhone using Tapatalk

Offline Dynamik

  • Just Arrived
  • **
  • Thank You
  • -Given: 0
  • -Receive: 0
  • Posts: 12
    • Email
Re: Intake manifold motor, Help!
« Reply #7 on: March 08, 2014, 09:13:24 pm »
Thumbs up for the DIY link Bacillus! I'm literally smiling hahaha

Offline Dynamik

  • Just Arrived
  • **
  • Thank You
  • -Given: 0
  • -Receive: 0
  • Posts: 12
    • Email
Re: Intake manifold motor, Help!
« Reply #8 on: March 08, 2014, 09:17:45 pm »
If it helps ? the dealer price to replace the motor here in the UK is £195 including VAT and it's around 1 hours labour. 


Sent from my iPhone using Tapatalk

Good info cheers mate! For 1 hour work and the part they quoted me $1k. hmmm im not so sure if I can trust this VW service centre.. or is it just the premium that I have to pay for their service? I wonder..