Make a donation
« previous next »
Pages: [1]   Go Down

Author Topic: how on earth do you get the can gateway out?  (Read 1022 times)

Offline paul_mck

  • Taking part
  • ***
  • Thank You
  • -Given: 0
  • -Receive: 0
  • Posts: 44
    • Email
how on earth do you get the can gateway out?
« on: February 25, 2014, 09:47:23 pm »
mine is buried up above the clutch pedal right up behind the instrument cluster. any tips on getting it out? I could just about get my fingers to it.

any help appreciated!
Logged

Offline doylebros

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 44
  • -Receive: 309
  • Posts: 2774
Re: how on earth do you get the can gateway out?
« Reply #1 on: February 25, 2014, 09:54:21 pm »
This is worth a read

http://www.mk5golfgti.co.uk/forum/index.php/topic,47405.msg589543.html#msg589543

Through the engine bay - wipers out etc access in 15 mins in and out.
Logged

Offline scopes

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 131
  • -Receive: 115
  • Posts: 2283
  • Wolfsburg Edition
    • My GTI
    • Email
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,49748.0.html
Re: how on earth do you get the can gateway out?
« Reply #2 on: February 25, 2014, 09:57:40 pm »
Just like Ed says:

Above The clutch Pedal

Undo the 2x Torx screws of the drivers footwell trim and lower it down.
The Cubby bin under the light switch, nip the sides in and pull it towards the drivers seat. You will see a Torx screw that holds the lower duct pipes in place, remove the screw and pull the ducting out.
The gateway will be up and look for the RED Plug
Unplug it
Prise the Plastic holder away from the metal frame with a slotted screwdriver
and remove it with the gateway in place.
Change the gateway over and reset the plastic rivet which held the holder in place.
And refit it

Just need some patience with this, if in doubt, stop and have a cuppa  :wink:
Logged
If it's not broke, Mod it.....



Silver is the way !

Offline doylebros

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 44
  • -Receive: 309
  • Posts: 2774
Re: how on earth do you get the can gateway out?
« Reply #3 on: February 25, 2014, 10:07:18 pm »
Quote from: scopes on February 25, 2014, 09:57:40 pm
Just like Ed says:

Above The clutch Pedal

Undo the 2x Torx screws of the drivers footwell trim and lower it down.
The Cubby bin under the light switch, nip the sides in and pull it towards the drivers seat. You will see a Torx screw that holds the lower duct pipes in place, remove the screw and pull the ducting out.
The gateway will be up and look for the RED Plug
Unplug it
Prise the Plastic holder away from the metal frame with a slotted screwdriver
and remove it with the gateway in place.
Change the gateway over and reset the plastic rivet which held the holder in place.
And refit it

Just need some patience with this, if in doubt, stop and have a cuppa  :wink:

The method above is for those flexible type for the none flexible type use this

http://www.r32oc.com/topic/29242-canbus-gateway-location-removal/
Logged

Offline marko

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 16
  • -Receive: 33
  • Posts: 903
    • Email
Re: how on earth do you get the can gateway out?
« Reply #4 on: February 25, 2014, 10:30:52 pm »
Scuttle panel
Wiper motor
2 nuts
Boom!!!...
You get to keep the skin on yer knuckles this way..lol
Logged
2007 TR gt170...heated leather,underseat drawers,auto-levelling bi-xenons,puddle leds,chrome switches,footwell lights f+r,cruise control and ed30 rear lamps,LED interior....carbon highline clocks,ed30 front spoiler,RNS 510 P+MDI,mk6 gti gearknob,TPMS done,complete r32 trim kit+ MFSW,r32 f+r brakes,RLS fitted.headlamp washers,folding mirrors and boot pop,mk6 RVC,19"Helios,AP coilies,valeo LEDs  ...dpf delete and remap to finish off

Offline paul_mck

  • Taking part
  • ***
  • Thank You
  • -Given: 0
  • -Receive: 0
  • Posts: 44
    • Email
Re: how on earth do you get the can gateway out?
« Reply #5 on: February 26, 2014, 07:48:12 am »
scuttle panel looks the job cheers guys!
Logged

Offline SI-R32

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 8
  • -Receive: 125
  • Posts: 1001
Re: how on earth do you get the can gateway out?
« Reply #6 on: February 26, 2014, 08:10:35 am »
only problem with doing it that way is the wipers can be an absolute bitch to get off as they corrode onto the spline, once these are off its all plain sailing.
Logged
Loads of extra's and retro fits.

Offline SRC

  • Always Involved
  • ****
  • Thank You
  • -Given: 21
  • -Receive: 27
  • Posts: 376
Re: how on earth do you get the can gateway out?
« Reply #7 on: February 26, 2014, 06:44:27 pm »
Call a gynaecologist?
Logged


Shadow blue DSG 5 door with leather, sunroof, 18" Monzas, MFSW. 
Full list of mods:  Seat inserts and a VW bottle opener.  Each worth 20bhp.
Pages: [1]   Go Up
« previous next »